|
|
|
#11
10-21-2010, 07:59 AM
|
|||||
|
|||||
Quote:
 Tinkered around with flow settings tonight, here's a bit of a preview. http://www.youtube.com/watch?v=LUJXrlsf9U4 The sump return comes out 4 nozzles placed along the Calfo manifold. 3 on the right pointing left, 1 on the left pointing down. The idea I had here was to create a vertical gyre that sweeps towards the overflow. The two 6080's in the middle on Wavysea's sweeping left and right, at different speeds so that sometimes they're in sync and sometimes they're not. Two waveboxes on the left. Last but not least (and unfortunately not shown) there are 2 6100's positioned one left and pointing right and back, and the other one right and pointing left and forward - these are on the controller so alternating between 100% and 10% about once a minute. The back room is a terrible clusterfrack of wires and I have my work cut out for me the next day or two getting that all cleaned up. Next up I need to get the heater on there and the Ranco and then I'm dumping salt and working on rocks!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! 
|
Threaded Mode
