Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Polls

View Poll Results: How Long Do You Mix A Fresh Batch Of Salt Before Putting it in the Tank?
A Couple of Hours 47 28.66%
12 Hours 8 4.88%
24 Hours 59 35.98%
2 Days 35 21.34%
However Long it Takes the Heater to Get it to Temperature 15 9.15%
Voters: 164. You may not vote on this poll

Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2009, 02:18 AM
no_bs's Avatar
no_bs no_bs is offline
Member
 
Join Date: Mar 2009
Location: Kamloops BC
Posts: 415
no_bs is on a distinguished road
Default

Quote:
You need the Rubbermaid Brute container in gray, white or yellow: http://www.rubbermaidcommercial.com...Osearch=2643-00
Quote:
This came up a few months back and the end result was that Rubbermaid confirmed that their other models leached chemicals and were not recommended for storing RO/DI water or saltwater for the aquarium hobby. They suggested sticking with their models that meet USDA guidelines as they do not have that problem. Several hobbyists (including Ltspd on this board) tested their RO water prior to storing it in their Rubbermaid container (wrong model) and then tested it a few days later and found phosphate levels that were unacceptable. So it turns out that only the more expensive Rubbermaid containers that meet USDA guidelines are recommended for use as water storage containers or sumps/refugiums for reef tank systems.


Here is another site that goes into detail.

http://www.reefland.com/cgi-bin/foru...ght=Rubbermaid

Got me thinking!

Don't use anything else. I curently use a beige rubbermaid, and after a few weeks in there it gives off an smell! I do clean it out every 3 fillups but always will smell! So not knowing to now knowing. I will change. IMO.

Last edited by no_bs; 11-30-2009 at 02:26 AM.
Reply With Quote
  #2  
Old 11-30-2009, 05:42 PM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by no_bs View Post
Quote:
You need the Rubbermaid Brute container in gray, white or yellow: http://www.rubbermaidcommercial.com...Osearch=2643-00
Quote:
This came up a few months back and the end result was that Rubbermaid confirmed that their other models leached chemicals and were not recommended for storing RO/DI water or saltwater for the aquarium hobby. They suggested sticking with their models that meet USDA guidelines as they do not have that problem. Several hobbyists (including Ltspd on this board) tested their RO water prior to storing it in their Rubbermaid container (wrong model) and then tested it a few days later and found phosphate levels that were unacceptable. So it turns out that only the more expensive Rubbermaid containers that meet USDA guidelines are recommended for use as water storage containers or sumps/refugiums for reef tank systems.


Here is another site that goes into detail.

http://www.reefland.com/cgi-bin/foru...ght=Rubbermaid

Got me thinking!

Don't use anything else. I curently use a beige rubbermaid, and after a few weeks in there it gives off an smell! I do clean it out every 3 fillups but always will smell! So not knowing to now knowing. I will change. IMO.
OK thanks for the links.

I have been using the grey brute cans for a long time and haven't noticed any problems.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:57 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.