![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
Loading firmware file into memory Firmware file load complete... Calculating Apex Start Checksum Vector Calculating Apex Start Checksum Vector complete... The controller address is: 192.168.1.171 Connecting to controller at address: 192.168.1.171 Connecting Connected, waiting for login prompt Login prompt detected, sending user name information User name accepted, sending password information Waiting for login to be accepted Login successful Login successful Requesting boot loader version information Placing Apex in read to receive mode Trying to connect: attempt 1 Found ARP entry at address: 192.168.1.171 Waiting for input from Apex, timed out Trying to connect: attempt 2 Found ARP entry at address: 192.168.1.171 Waiting for input from Apex, timed out and so on and so on with out ever getting passed the Apex timing out right now im trying to load the "aqua4.hex" file my IP add is: 192.168.1.50 my HTTp Port is: 80 user is: admin pass is: 1234 ive also tried restarting the base unit with no luck as well |
#2
|
|||||
|
|||||
![]() What is that 192.168.1.50? The computer IP? Base unit?
__________________
Brad |
#3
|
|||||
|
|||||
![]() Beside the network address field is a magnifying glass, if you click that, does it resolve the IP?
Your unit is not exposed to the internet, I assume that's by design?
__________________
Brad |
#4
|
|||||
|
|||||
![]()
__________________
Brad |
#5
|
|||||
|
|||||
![]() Hey Brad Thank you very much I dont know what i did, i just back tracked a lot of stuff and started over and this time it worked first time
THANKYOU FOR EVERYTHING!!! and everyone as well |