Ro/Di Unit

[Gizmoh]

Just looking for some input which would you get?

MC spectrapure

Or

Vertex Puratek

I hear the spectrapure is better unit just looking for a little feedback!

Thanks

Justin

[cale262]

I've been using a puretec for a couple years now with no issues, the addition of the booster pump is a welcome feature and may produce better performance pending on the water pressure in your area.

[Cal_stir]

Check this out.

http://www.aquasafecanada.com/store/...smosis-systems

[Enigma]

Originally Posted by Cal_stir

Check this out.

http://www.aquasafecanada.com/store/...smosis-systems

X2. That's what I use, and I'm very pleased with it.

The aquasafe membranes is rated for 1000 gallons versus the 6000 gallon with other units like BRS. You will be changing it quite often. Take that into consideration.

[intarsiabox]

Originally Posted by Cugio

The aquasafe membranes is rated for 1000 gallons versus the 6000 gallon with other units like BRS. You will be changing it quite often. Take that into consideration.

Where did you get this info from? Their website says the pre and post filters should be changed every 1000 gallons on their aquarium combo system that comes with 6 sets of pre/post filters to last the membrane lifespan.

[mike31154]

Membrane, carbon & pre filter change schedules will be very dependent on the source water, which can differ greatly according to where it comes from. i.e. where you live. No sense getting too hung up on numbers from manufactures that are based on specific conditions which may or may not correspond to what will actually happen when you hook their unit up to your water source. Many variables, temperature, pressure, TDS, chlorine, chloramine and on and on. Most units are built using relatively generic components as far as the housings go. Whatever you decide on, make sure the membrane & carbon block are premium quality. The rest of the hardware is generic 10" stuff with each manufacturer simply stamping their name on it. I think some manufacturers individually test the membranes before assembling & shipping their units. This comes at an extra cost & if you're willing to bear that, go for it. For most of us, a brand name membrane will do just fine.

Sorry that is a typo. I didn't mean membrane but on the sediment filters.

[gregzz4]

Any GE membrane is the way to go for replacements

Just make sure what you buy takes the TFC style as I believe they are the most popular / easiest to find

And, for Justin, I bought a Vertex ( not your linked model ) and am happy with it

[DiverDude]

I have the Vertex you linked to. 2 years now, never had a problem. It has a booster pump (so I get 1:1 good water to waste water ratio) and a built-in backflush system as well as a built-in TDS meter.

Good bang for the buck.