Cabinet builder

[Coleus]

hi guys

I am looking for some advises or pointers from someone who may have got this done before. I plan to build a new tank on my main floor between two beams, it is similar to this



Now, i am wondering if i should have steel stand and then find someone to skirt it or build the whole cabinet? Which way is easier and if anyone has a good recommend cabinet builder that can do this for a reasonable price?

Thanks

[gtreef]

Concept Aquariums will build custom steel stands and then you can build the wood exterior around it, I was lucky and my husband did the cabinet himself… perhaps a good cabinet maker (i.e. kitchens) or concept might be able to recommend someone.

[The Grizz]

Start with a steel stand Tai then you has something solid that will not deteriorate under your tank. Then its also easier to attach any panels to the stand easily.

[Coleus]

Originally Posted by The Grizz

Start with a steel stand Tai then you has something solid that will not deteriorate under your tank. Then its also easier to attach any panels to the stand easily.

Thanks Greg, I understand that you can attach panels to the stand with magnets but not sure how they will hold panel because magnet will slide up and down easy. Can you show me how to do it? Thanks

[Parker]

Here's what mine looks like under it's skin.

[Coleus]

Thanks Robb, hmm i don't think i have the space to build a a full wood frame outside of metal stand because of limited space and i want the longest as possible, I guess it is probably my best option to build the whole cabinet for it. I am going to contact some cabinet builders and get their quotes. Thanks all

[The Grizz]

I did a very similar thing as Parker but I cut the front frame out around my stand and used a PL400 adhesive to attach to the stand. Then attached the doors to the stand using European hinges.

[Coleus]

Greg, any chance you give me a photo of how you mount your European hinges?

[The Grizz]

Sure thing big guy. Here's one showing one door and a close up of the top hinge. I use what is called a Tec screw to attach to steel stand, drills a hole and then treads it.


Stay clear..... this Bear bites off limbs!!

[Coleus]

Thanks Greg