LF 1 inch PVC Wye

[straightrazorguy]

Originally Posted by duncangweller

Would a 'T' work?

Not as well as a wye....

[Baker]

That would be a hard fitting to get. I'm actually surprised that anyone would have it. If they have it and you absolutely need it then I would grab it as I doubt your going to find it anywhere else.

[monocus]

for splitting a drain i used an abs y and glued it with abs/pvc glue.for a return i used a pvc t with a couple of 45s on the out and a 45 above the pump,both work great

[straightrazorguy]

Originally Posted by monocus

for splitting a drain i used an abs y and glued it with abs/pvc glue.for a return i used a pvc t with a couple of 45s on the out and a 45 above the pump,both work great

Thanks Bill, it's for splitting a drain, I want one stream going to the refugium. Interesting, can you actually find abs wyes?

[Ryanerickson]

Wye fittings are more for drainage you can get them in abs or larger PVC. Drainage fitting but finding one in 1" PVC will be hard. I'm a plumber and never seen one I'm sure they make them Just a odd fitting.

[Baker]

Abs wye's are very common in 1 1/2". So you would need to bush them down to the 1".

[monocus]

i find a larger drain better.all my tanks have 2"stockman drains.where i y ed it on my frag tanks i reduced one of the y s for my algae scrubbers