Free - AEFW

[Aquattro]

Originally Posted by Proteus

Brad with a 400w how high would you hang that light. there's alot of lumens beaming down. In my shallow tank its 12" with a 250w

Not sure. Probably 10 or 12 inches. Height will be determined by spread. Using a lumenarc reflector, so spread should be enough for most of the area. Not too concerned with intensity, the corals can handle it fine. Supplementing with 2 T5 superblue for pre/post daylight.

[Reefer Rob]

Why not a 36" cube? Your halide light pattern is square anyway

[Aquattro]

Originally Posted by Reefer Rob

Why not a 36" cube? Your halide light pattern is square anyway

Too big, would stick out too far into the room. I had a 36" cube frag tank, and found it tough to work in.

[StirCrazy]

Originally Posted by Aquattro

Too big, would stick out too far into the room. I had a 36" cube frag tank, and found it tough to work in.

you should see if my old tank is still floating around vic somewhere not being used.

Steve

[Aquattro]

Originally Posted by StirCrazy

you should see if my old tank is still floating around vic somewhere not being used.

Steve

Too small

[hillegom]

Brad,If you want some of that Bayer insecticide, I have some.
Just picked it up yesterday. Have any friends coming to the lower mainland?

[Aquattro]

Originally Posted by hillegom

Brad,If you want some of that Bayer insecticide, I have some.
Just picked it up yesterday. Have any friends coming to the lower mainland?

Thanks, but the RPS is good for my purposes. I'll just be taking frags off colonies and treating, then add to new tank.