Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 03-04-2014, 06:57 PM
Masonjames Masonjames is offline
Member
 
Join Date: Jun 2013
Location: Lethbridge
Posts: 105
Masonjames is on a distinguished road
Default

I would wait longer then 3 hours. Mind ya your not using allot but still, 3 hours seems pretty short IMO. Even 24 hrs is stretching it in my opinion. Sure the silicone may be "cured" but it will still gas off for some time after. All those fumes you smell, means a release of VOC and wether it's submerged or not that gas off is going to continue past the cure time listed on the directions. So gas off would be directly into the tank. Granted I'm sure allot have done less and seen no ill effects but always better to be safe then sorry. Most tank crashes you hear from people using the wrong silicone to re seal or build a new tank etc. Probably arnt actually a result of the wrong silicone being used. A large majority of them I guarantee are a result of all those 24hr rules. Sure it's "cured" but there will still be a significant gas off which occurs for days after. And the tank inhabitants are the ones left breathing in that wonderful fresh air. So IMO the longer you can wait the better. But again, I am sure many have had success and no problem associated with 3 hrs, 24 etc. Just wanted to express another opinion. Best of luck whichever route you choose. Might even be worth just going that mag float route as others have suggested if you can't keep your water level dropped for what you feel would be a comfortable and doable time for you and the tank.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:15 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.