Ok, let's hear it!

Aquattro · #1 10-29-2013, 01:48 AM

Quote:

Originally Posted by Reef Pilot

Any adjustments are made with my computer.

Oh, I miss this too

Although once adjusted, they were set and forget. Although I can set the timers via computer still. I can turn my T5 off. Then on. Then off again. I can actually do this with my phone. But I haven't been that bored yet -lol

Reef Pilot · #2 10-29-2013, 01:52 AM

Like I said in my earlier post, I probably shouldn't have waded into this discussion....LOL. I don't have time for another "What is a corporation" debate.

mrhasan · #3 10-29-2013, 01:53 AM

Quote:

Originally Posted by Reef Pilot

Like I said in my earlier post, I probably shouldn't have waded into this discussion....LOL. I don't have time for another "What is a corporation" debate.

I had to unsubscribe from that thread.

Doug · #4 10-29-2013, 04:42 AM

lastlight · #5 10-29-2013, 04:57 AM

I'm finding the colours I'm getting with my mitras to be just as good if not better (finally) than with my radiums. tank seems to be on an upward swing which I believe has nothing to do with the lights.

one thing that still stand out to me is how much better halides look over tanks during daylight hours. my LEDs just don't look bright enough to make the tank pop when it's light in the room. once evening rolls around my tank looks so much better in a dark livingroom.

Aqua-Digital · #6 10-29-2013, 10:58 AM

Quote:

Originally Posted by lastlight

one thing that still stand out to me is how much better halides look over tanks during daylight hours. my LEDs just don't look bright enough to make the tank pop when it's light in the room. once evening rolls around my tank looks so much better in a dark livingroom.

Under energy saving option switch the lamp to high output mode and 100% max power, then go to composer and press 100% full spectrum and 100% brightness

Place supplied glasses over eyes before pressing save

lastlight · #7 10-29-2013, 04:18 PM

Quote:

Originally Posted by Aqua-Digital

Under energy saving option switch the lamp to high output mode and 100% max power, then go to composer and press 100% full spectrum and 100% brightness

Place supplied glasses over eyes before pressing save

We all know how gross that looked. I'm sure you recall the reef builders article lol.

Aqua-Digital · #8 10-29-2013, 09:44 PM

Quote:

Originally Posted by lastlight

We all know how gross that looked. I'm sure you recall the reef builders article lol.

You know nobody could ever replicate that photo, hmmm go figure