|
|
|
|
|
#1
02-15-2012, 04:33 PM
|
|||||
|
|||||
I hate it, I bought some zoo's a long time ago on disks, and now, I'm afraid I will be stuck with them on the disk. I much prefer to just get the cuttings and glue them myself, or have them mounted on small pieces of LR that looks more like it belongs
__________________
I'm not 'fallow' you must be talking about my tank! 
|
|
#2
02-15-2012, 04:45 PM
|
|||||
|
|||||
|
I put them on frag racks if they're very small and allow them to grow a little (or a lot, sometimes they stay on there for months due to lack of time to mount them). For the most part they usually just encrust onto the frag plug which is a pain but then I whack the bottom off and epoxy it to the rock much (much) later. otherwise it usually gets lost in the tank as a small frag.
For the larger colonies that come on those chunks of rock I usually remove them and mount them directly to the rock. For some reason I can't throw the rock out so it ends up in the sump, spreading its lovely hitch hiker wonderfulness to the rest of the tank 
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#3
02-15-2012, 04:52 PM
|
|||||
|
|||||
 This may appeal to some who don't like having to cut, trim, and mount their frag plugs. Apparently you don't have to drill either, just find a small crevice and twist them in. It looks to be a nice small profile also so the frag has a better chance of seamlessly covering the plug and rock. Found the info here: http://reefbuilders.com/2012/01/17/reeftap-frag-plug/
|
Hybrid Mode
