![]() |
|
#1
|
|||||
|
|||||
![]() With those measurements thats a 180G tank. 36" is pretty deep and hard to reach the bottom if you need to. If the customer goes 24" deep it drops it down to 120G. Than that will make rom for a sump underneath. The plan seems a little complicated and too much work.
|
#2
|
||||
|
||||
![]() May very well be true! We will have to see! If so then it will be to plan B! Thought I would give it a try anyways!
|
#3
|
|||||
|
|||||
![]() What about using canister filters in parallel to get the enough filtration and an inline protein skimmer? Would that not work??
|
#4
|
|||||
|
|||||
![]() I think most of us on here started out with cannister filters. Most of us now have sumps. Might as well do it right from the start. Sumps are much easier to do things with and add new equipment with as you get more advanced in the hobby.
|
#5
|
|||||
|
|||||
![]() I agree for a sump is better for someone in the hobby, however, if this is just for display in an office, then a closed system may be a better option.
|