Tom's Aqua Lifter question

[Maverick00]

I use one for my CPR overflow. As far as i know it has a check valve of some sort. Ive unplugged it while the cpr was running and it didnt allow any air back into the overflow. I wouldnt think itd allow a siphon of water either but someone else should confirm this first...

[Maverick00]

i played around with the pump and was easily able to blow air backwards through it. Judging by this id probably add some sort of check valve between the pump and the ato outlet line.

[MKLKT]

The problem is that it would be used to pump into the sump which would require the check to be in the same direction as the intended flow, it's not a backflow issue. The pump essentially is the top off, the ATO only says OFF/ON.

[Maverick00]

Originally Posted by MKLKT

The problem is that it would be used to pump into the sump which would require the check to be in the same direction as the intended flow, it's not a backflow issue. The pump essentially is the top off, the ATO only says OFF/ON.

sorry i somehow overlooked that.

[Maverick00]

Im curious now if the tunze ato would work in your type of scenario.

[syncro]

You could use a gravity ATO. Simply plumb a 1/4" airline hose from the freshwater to a float valve (not float switch) in your sump.

[don.ald]

i dont think the aqua lifter is going to work with the ATO system. the pump is so slow that the system will time out and shut down. you need a stronger pump. you can put the aqua lifter on a timer and run it. eliminating the ATO.

[mike31154]

Originally Posted by syncro

You could use a gravity ATO. Simply plumb a 1/4" airline hose from the freshwater to a float valve (not float switch) in your sump.

Bingo to this. With raised reservoir you won't need any electrical gizmos, just a simple mechanical float valve. Simple & much less to go wrong.