Milad's 72in LED build

GMGQ · #1 02-23-2011, 10:22 PM

Milad,

Am I correct to assume that on the left side of the terminal blocks, they are all jumper together?

Thanks.

Quote:

Originally Posted by Milad

So here is the wiring diagram and parts list
wiring on between LEDs is 22awg
wiring from driver to blocks is 20awg

Milad · #2 02-23-2011, 10:46 PM

Quote:

Originally Posted by GMGQ

Milad,

Am I correct to assume that on the left side of the terminal blocks, they are all jumper together?

Thanks.

Not all jumped together, the ones for each driver are jumped together.

Ive also changed the design and im not using the meanwell 240s because they dont dim all the way. they only dim to 50%

KevinK · #3 03-29-2011, 08:29 PM

hi milad,

gust checking what the progress is !!

any updates ?

Milad · #4 03-30-2011, 12:24 AM

Im going back and forth and back and forth of the heatsink design

the latest rendition is a linear design with two long skinny heatsinks. until I nail this down its not moving. Give me another month or so before you see pictures.

Bblinks · #5 07-13-2011, 05:14 PM

Malad, just curious on the progress?

Milad · #6 07-13-2011, 05:27 PM

Heatsink is in, went with a solid piece 6 feet long

For the LEDs I decided im going to use myself as a genuine pig for a new board design we are working on. I should have the new board within the next two months. Once I have the LEDs on the new board, it will literally be a 30min install process.

I will be going with the new XM-Ls NW/CW and XP-E RB.

Bblinks · #7 07-13-2011, 05:34 PM

Cool, thanks for the up-date. looking forward for the finished product.