Lance's 225 gal tank

[Lance]

Originally Posted by burrows14

You would be good to go in 15 mins. I have used both plumbing a bunch of friends tanks. I always use the prime the fittings and let it dry completly before glueing. Be genourous with the glue and make sure to give the pipe a quater turn to make sure their is no air bubbles and the glue is spread evenly and then use paper towel to wipe off the excess glue. You should have no leaks and a nice clean look that way.

Cheers
Ray

Thanks Ray. I wanna make sure I'm understanding you. I've used Weld-On plenty of times. It's not the cure time of the glue or the procedure I'm worried about, it's the effect of the glue on a tank full of animals that worries me. Am I understanding that after 15 minutes of curing there was no problem on an inhabited tank?

[Zoaelite]

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

[Lance]

Originally Posted by zoaElite

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

Thanks. Nope, I've never seen any babies. They probably hatch out at night and are skimmed off.

[lastlight]

I had finished doing some plumbing on my first tank and I must have let the parts sit drying for at least 30 min. I wanted to know if it was still wet and decided to put my nose to one end of the plumbing and 'take a wiff'.

I damn near fell over everything went black. I don't think I had used more glue than needed either I'm just saying the stuff was still potent. 30 min seems too soon to me.

[Lance]

Originally Posted by lastlight

I had finished doing some plumbing on my first tank and I must have let the parts sit drying for at least 30 min. I wanted to know if it was still wet and decided to put my nose to one end of the plumbing and 'take a wiff'.

I damn near fell over everything went black. I don't think I had used more glue than needed either I'm just saying the stuff was still potent. 30 min seems too soon to me.

Yeah, that's what I'm thinking: If you can still smell it, it's not fully cured. I think I'll leave it until no odor left.

[lastlight]

When you do your nose test just use one nostril that way you can only HALF blackout. It works like that right!?

[Lance]

Originally Posted by lastlight

When you do your nose test just use one nostril that way you can only HALF blackout. It works like that right!?

Jeez! I don't know. I'm already a half-wit. Might only take one nostril to put me on the floor.

[muck]

Originally Posted by zoaElite

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

No doubt... unbelievable the amount of eggies.
Thanks for the pics Lance.

[burrows14]

Originally Posted by Lance

Thanks Ray. I wanna make sure I'm understanding you. I've used Weld-On plenty of times. It's not the cure time of the glue or the procedure I'm worried about, it's the effect of the glue on a tank full of animals that worries me. Am I understanding that after 15 minutes of curing there was no problem on an inhabited tank?

I have glued my last fitting, double checked everything and fired up with no harm to fish and corals. I wouldn't worry about it all.. The tank volume would dilute it and I'm sure your running carbon. If you drop the whole can in tho... Totally different story lol

[Lance]

Originally Posted by burrows14

I have glued my last fitting, double checked everything and fired up with no harm to fish and corals. I wouldn't worry about it all.. The tank volume would dilute it and I'm sure your running carbon. If you drop the whole can in tho... Totally different story lol

OK, I'm feeling better about it. And I won't drop the can in the tank.