![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
The newer LED systems provide this opportunity. You can focus light beams, programme different lighting and dim which is not available on dated MH lighting. I would encourage the lighting experts on this board to experiment with DIY and bought systems. I am defineately not knowledgeable of the details of LED but IMO LED is the future. Wayne |
#2
|
|||||
|
|||||
![]() Quote:
|
#3
|
|||||
|
|||||
![]() Ya, who's gona patent Plasma lighting for Aquarium use????!!!!!!!!!
__________________
Dan Pesonen Umm, a tank or 5 |
#4
|
|||||
|
|||||
![]() As far as the patent issue if concerned I'm pretty sure you could still build and market another LED fixture pretty easily. But in order to do so you'll have to have some obvious difference and fork out the money to patent your own fixture. The reason PFO lost so badly is they didn't have a patent and the other company just so happened to have one that described the solaris quite nicely. This is a risk you take if you're going to sell and market a new new idea without a patent, it's also why you see patent pending around more than actual patents. The trick is to fill out the initial paper work for a patent but never complete the process, that way if someone else comes into the market you can complete your patent and because your initial paper work was in first you'll win.
Really I don't think the patent is the issue stopping more competition. First off the patent applies only to the US and yet I don't see any large advances from other countries like Europe or even China. The problem is this lighting source is too expensive, too complicated, not as efficient as people think, and not as effective as people think. It's a gimmick product more than anything and it really can't compete with the leaders in the market, T5s and MHs. Last edited by sphelps; 02-07-2010 at 04:23 PM. |
#5
|
|||||
|
|||||
![]() How the heck is Aqua Illumination able to make and sell LED fixtures? AND, they state assembled in the US
http://www.aquaillumination.com/?page_id=38
__________________
Dan Pesonen Umm, a tank or 5 Last edited by banditpowdercoat; 02-07-2010 at 04:26 PM. |
#7
|
|||||
|
|||||
![]() Quote:
The the point I was trying to make was that with LED is available now and Plasma technology is around the corner it would not be a good move to invest in expensive MH lighting at this time. It would be much better to invest in a cheap T-5 option. MHs are expensive, have a huge demand for electricity, create tremendous heat which has to be dealt with chillers or noisy supplementary fan additions, require frequent bulb replacement, cannot be programmed to dim and require supplemental lighting. Would anyone by an analog TV today? Would anyone buy an ordinary LCD TV today when the 3D technology is available for sale this summer? |
#8
|
|||||
|
|||||
![]() I sure wouldn't buy a 3d tv just yet!!!
__________________
Dan Pesonen Umm, a tank or 5 |
#9
|
|||||
|
|||||
![]() Quote:
![]() Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#10
|
|||||
|
|||||
![]() Quote:
All I'm currently running is 500W of halide and the color is good. I only need a small fan on hot days (no ac in house) and replace the bulbs once a year which runs for about $140. If I had all T5 I would spend about the same or more on bulbs, still require a fan on hot days but I'd save a little in power but not enough to make much difference. T5 bulbs also burn out prematurely and take up more space which is why I'm now using halides. LEDS can't touch the intensity and penetration of halides, for clams and SPS halides win. For a softy and LPS tank LEDs may work well but you'll never get your money back in energy savings and I'd still like to know how long the bulbs actually last. LEDs do burn for 10 years but halides will also burn for 5+ years but you still have to replace them every year. My guess is that LEDs will require replacing somewhere around 3-4 years and the cost will be ridiculous, likely cheaper and easier to buy a new fixture. And who really cares about dimming? ![]() |