PLC Fish Tank Controller Project

Vancouver Reefer · #1 03-09-2009, 09:24 PM

Hi all,

Here is a link to my Arduino based tank controller im in the process in building for my BC29:

http://richardorme1979.googlepages.com/home

Jeremy,

What program did you use to design your GUI screen for use with your PLC?

VR

brizzo · #2 03-09-2009, 11:18 PM

Quote:

Originally Posted by Vancouver Reefer

Hi all,

Here is a link to my Arduino based tank controller im in the process in building for my BC29:

http://richardorme1979.googlepages.com/home

Jeremy,

What program did you use to design your GUI screen for use with your PLC?

VR

First of all, Welcome to CanReef !!

That's awesome work Jeremy! You've gotten much more progress than I have. Too many projects and so little time.

I finally got in some solid state relays, along with outlets and override switches. I've been devising a plan to build a DIY dosing pump system for balling method

There's a few other guys on RC who have been working on the same stuff here. And also setup a wiki site here.

Gizmo · #3 03-09-2009, 11:50 PM

Check out http://www.phidgets.com/
I'm using these babies for both control and input from sensors.
Easily programmable in Flash (thats what i'm using) or c++ or any language really. They use USB connections to talk to the puter, and you can get your interface to work over the network as well.

banditpowdercoat · #4 03-10-2009, 02:00 AM

Quote:

Originally Posted by Vancouver Reefer

Hi all,

Here is a link to my Arduino based tank controller im in the process in building for my BC29:

http://richardorme1979.googlepages.com/home

Jeremy,

What program did you use to design your GUI screen for use with your PLC?

VR

Where did you get your LED's from? and how well do they work?

Vancouver Reefer · #5 03-11-2009, 11:43 PM

Quote:

Originally Posted by banditpowdercoat

Where did you get your LED's from? and how well do they work?

Hey Bandit,

I have not purchased the LEDs yet but they are in the pipeline.

For all the information you could ever want Evilc66 has been doing some serious research on these over on Nano-reef.com.

Have a read and all will become clear!!

http://www.nano-reef.com/forums/inde...owtopic=186982

Most of the guys are buying the Buck Puck LED drivers from LEDsupply.com
and then several places world wide for the LED's

Enjoy the read.

VR

spreerider · #6 03-13-2009, 07:26 AM

I have a Mitsubishi Melsec A1S with 32 in and 32 out, 2 analogs and rs232.
i just got laid off and was about to start setting it up maybe next week.