ZEOvit/200G Build Journal - 34G Solana

[lobsterboy]

I didnt cycle my zeo at all, just got it up and running, change the zeolites, every first day of the month. keep the same dosing schedule, for 3months now, but am going to start adding, an extra drop of everything, see what happens.
I TOO, had the same problem with the refugium. i was like, am i going to keep it, ????? didnt know what to do, then one day later, started syphoming, the samd out and that it was. I wasnt running a skimmer, for 2 years, before I started the zeo system, so i made sure it was up and running for a month before i started.
yeah i find it has a low alk, dosing everyday to bump it up.

anyways, if you have any ques, pm me.

[GreenSpottedPuffer]

Originally Posted by lobsterboy

I didnt cycle my zeo at all, just got it up and running, change the zeolites, every first day of the month. keep the same dosing schedule, for 3months now, but am going to start adding, an extra drop of everything, see what happens.
I TOO, had the same problem with the refugium. i was like, am i going to keep it, ????? didnt know what to do, then one day later, started syphoming, the samd out and that it was. I wasnt running a skimmer, for 2 years, before I started the zeo system, so i made sure it was up and running for a month before i started.
yeah i find it has a low alk, dosing everyday to bump it up.

anyways, if you have any ques, pm me.

Thanks again. No real questions yet since I am just waiting until my water parameters stabilize until I start anything. I have very high alk from dosing limewater. I have stopped for three days now and will see if that helped.

BTW, anyone using the Vertex ZEO reactor? Thats what I picked up simply because it was cost effective. Seems very well built too.

[Jason McK]

the one 3 and off 3 is very important I believe it is the number 1 cause of tank craches or cyano out breaks. But you can do something else. just dial the pump down from full open to about 1/3 open then you can run it full time

J

[GreenSpottedPuffer]

Originally Posted by Jason McK

the one 3 and off 3 is very important I believe it is the number 1 cause of tank craches or cyano out breaks. But you can do something else. just dial the pump down from full open to about 1/3 open then you can run it full time

J

Ahhh yes that makes sense. Either way for me is easy. I certainly got the feeling this was an important step though because every single newbie thread I read through on ZEO.com had this advice given to them and made it clear how important this was to do for the first month or so. Some of them said you can even continue this long term and always have it cycle.

Jason how often do you change your ZEOlites?

[Jason McK]

I change every 12 weeks. but at the begining I'd say 8 to 10 weeks

J

[christyf5]

Originally Posted by Jason McK

the one 3 and off 3 is very important I believe it is the number 1 cause of tank craches or cyano out breaks. But you can do something else. just dial the pump down from full open to about 1/3 open then you can run it full time

J

Yeah I have my reactor effluent dialed down as when the pump is off the rocks are out of water as the level in my sump isn't high enough. It works fine

[GreenSpottedPuffer]

Originally Posted by christyf5

Yeah I have my reactor effluent dialed down as when the pump is off the rocks are out of water as the level in my sump isn't high enough. It works fine

Good to know. I think the rocks would still be in the water even when off but I am not sure yet. I will have to see and then make a choice.

Thanks!

[Johnny Reefer]

I did the 3 on, 3 off and my sysytem is not SPS. I have only one Turbinaria. I think it's important regardless.

[christyf5]

Originally Posted by Johnny Reefer

I did the 3 on, 3 off and my sysytem is not SPS. I have only one Turbinaria. I think it's important regardless.

Oh I totally agree, it just wasn't feasible in my case and they (the zeovit peeps) suggested dialing back the output as an option