Phosban reactor as zeovit reactor

[christyf5]

Make sure the intake hose is secure. I find that when you move the phosban reactor around the intake hose becomes loose and air can sometimes enter through there. I also increase the flow within the reactor when I shake it to get the bubbles moving through faster if any are created.

[kwirky]

Originally Posted by christyf5

Make sure the intake hose is secure. I find that when you move the phosban reactor around the intake hose becomes loose and air can sometimes enter through there.

yeah other than the awkwardness, caused by holding the output/input in place while shaking, it can work. Air bubbles aren't a huge concern I think. In a proper reactor you get air bubbles making contact anyways when you pump it if it's almost full of media. Never had problems with it.

[hecks220]

thanks for the feedback...those are great ideas