well I think that i have my mind set up

[Kenzy]

I have a 60x24x27(h), I think you would later regret not going with 24" front to back depth. I love built in tanks and would try for it to be veiwable on 2 sides if possible. You might also look at external overflows for more space in the tank.

[Skimmerking]

ya first off so everyone knows this is my 4th in wall tank 1st one was a 120 gal , then a 280 gal , then a 170 gal , and now this one and it will have external over flows and it will be 60x24x24 since my last on was the same other then it being a 60x27x24 27 wide that is the 27 was nice but the back room ,doesnt give me much room to move around, since its my furnace room

[Skimmerking]

Well I have changed my mind again the reason is I thought about and talked with Adidias about cube the only reason was i wanted to make a cube was the 1 light i would have to worry about and easy to change 2 bulb along with something simple. so i have switched back to a CUbe 36x36x24 since seeing Danny's tank on here. the stand will be 36x36x30 allowing me to have the stand be build some where else and havign it moved into the rec room once finished. so the cube is back on. just like Danny's. If I look at the way the tank is built its 36x36x24 i was thinking of a tank 30x30x30 the tank is o problem getting in. ITs the stand 30x30x30 it work probably work ,but dont want to take the chane of the stand not making it in the house after all the time and effort is put into it....

[Delphinus]

Bah. Walls can be rebuilt.

[Pescador]

My 220 is 48x36x30. It was fun going down the stairs and there was a little demo on the ponywall going down but we replaced it with a removable railing with spindles. I had the stand build in 2 pieces and bolted it together when it was in place.
The 36" front to back is still worth it.

[fishoholic]

Originally Posted by Pescador

My 220 is 48x36x30. It was fun going down the stairs and there was a little demo on the ponywall going down but we replaced it with a removable railing with spindles. I had the stand build in 2 pieces and bolted it together when it was in place.
The 36" front to back is still worth it.

[Skimmerking]

well here is my problem Tammy tells me that she wants the tank half in and out ofthe wall. I can't speak Im not that good at figuring out this stuff. where in the heck do I start..