![]() |
|
|
|
#1
|
|||||
|
|||||
|
take pictures of the hanging beacket and email them ......
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
|
#2
|
|||||
|
|||||
|
i used it as the instructions stated. nothing was rigged up.
now one side is rigged up. i will take pics shortly, as soon as i can locate my camera. |
|
#3
|
|||||
|
|||||
|
did the wire slip out of the little clamp? you can replace the wire with a gear cable from a bike for $2.50 if its wrecked but mabey you just didnt have the screw tight enough to hold the wire in place.
__________________
but what the heck do i know |
|
#4
|
|||||
|
|||||
|
Found the camera,..
ok. the little nipple thing that you would press in to lower the light Here is a shot of the good side. ![]() ![]() ![]() ![]() ![]() Here is the broken side. The threads on this piece split. i could actually take the light down again and take a picture of whats left. But im not removing it until new hanging kit arrives. ![]() ![]() ![]() ![]() |
|
#5
|
|||||
|
|||||
|
so was it the cable that frayed or was it a problem with the chrome thing that holds the cable?
__________________
but what the heck do i know |
|
#6
|
|||||
|
|||||
|
Chrome thing that holds the cable. it split in half.
|
|
#7
|
|||||
|
|||||
|
mabey the nut was over tightened?
__________________
but what the heck do i know |