|
|
|
|
|
#1
03-16-2007, 07:31 PM
|
|||||
|
|||||
I would like to get back into SPS, and I was thinking that I could do a bit of rockwork directly under the light and keep the species up close. I guess I was more worried about the light covering out far enough, especially considering just the short Actinic bulbs in the pendant for dawn/dusk.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 
|
|
#2
03-16-2007, 07:33 PM
|
|||||
|
|||||
|
Ultimately I wouldn't think that 2x150W will work all that well for sps in a 90 gallon tank unless they're all at the very top of the rockwork/water and that doesn't leave much room for growth sometimes. Using the single pendant will at least give you about 12 inches directly underneath and then probably another 4 or so on either side. What about getting a second pendant?
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#3
03-16-2007, 07:46 PM
|
|||||
|
|||||
|
Its an option, but if I went that way I think I would be better off putting a 2x250 retrofit with actinics in a hood to clean it up a bit. I just want to avoid the "grow-op" look.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
Hybrid Mode
