|
|
|
|
|
#1
02-07-2007, 05:57 PM
|
|||||
|
|||||
Stoked
well i was so stoked about doing this, i did it last night.
Here's the pic of the whole skimmer (with pennies taped on)  BUBBLES IN MAIN RISER BEFORE MODIFICATION:  BUBBLES IN SECONDARY RISER BEFORE MODIFICATION:  MOD PICS: BECKETT NOZZLE DISASSEMBLED PLUGGED WITH EPOXY  BECKETT NOZZLE ASSEMBLED  BECKETT NOZZLE SHAVED  BECKETT NOZZLE DRILLED  BUBBLES IN MAIN RISER ~1 MINUTE AFTER MODIFICATION:  BUBBLES IN SECONDARY RISER ~2 MINUTES AFTER MODIFICATION: 
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. 
|
|
#3
02-07-2007, 06:11 PM
|
|||||
|
|||||
|
More pics tonight
i'll take more pics tonight after its been running for about 12 hours.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
|
#4
02-07-2007, 06:50 PM
|
|||||
|
|||||
|
Dem tiny bubbles!
When I get a camera I will do the same with non-modded skimmer.
__________________
250 BB Starphire SPS, clams, & zoos 3 x 250 DE, IC 660 W/T5s OM 4-way, Hammerhead Pump Calcium, Kalk, RO filters, magnesium, Excellent prices
|
|
#6
02-08-2007, 06:07 AM
|
|||||
|
|||||
|
12 hours later
OK here are the pics 12 hours later.
  I personally don't see much of a difference. Mind you the bubbles were already pretty small to start of with even prior to the modification. I would like for somebody who's using a mak4 on a beckett skimmer to try the same mod.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
|
#7
02-08-2007, 06:57 PM
|
|||||
|
|||||
|
reply
Chin, your bubbles were a lot smaller to start with than most Beckets I've seen. I can't see much of a difference either.
Maybe there is a threshold to how small bubbles can get, and your skimmer had already achieved it. I'd still be interested to see other peoples results with this mod.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041
|
Hybrid Mode
