Profilux II plus aquarium controller

[Matthias Gross]

Hi All!

My name is Matthias, i am leading devloper (and BTW boss) of GHL.

Because we have had vacation the last days i could not response earlier.

However i'll try to give the best support here, let's start.

@niloc
These points are not correct:
- you assigned the port to 10002 - but as in the tutorial mentioned it must be 10001 (and please set the checkbox "Raw Data")
- you set the WLAN to default - by doing this all prevoius WLAN settings are lost, please do the settings with deviceinstaller again. The setting WLAN to defaults should only be done if there had been made confusing settings and it is not possible to establish a connection (eg setting WPA password and forgetting this)
- please disable the router function - this is only useful if you connect a second ProfiLux to your current device
- hyperterminal can't be used to establish a connection and to alter settings

I think that's it. Please let me know if you need further assistance.

@big blue
Thank you for coming to this forum and giving support

@All
I am glad (and proud) our ProfiLux now is available in North America - thanks to Jason and his staff - I hope you will enjoy your new aquariumcomputer!

Greetings