Profilux II plus aquarium controller

bullit67 · #1 12-24-2006, 08:09 PM

Colin

You do have a wireless network set up in your house From what I understand you need to have a wireless network up and running it wont go directly to your wireless computer it needs a router to work.

Just incase you didnt know

Then again I could be wrong as I have a LAN card and I beleive it needs to be conected to a router

Merry Christmas

Doug

niloc16 · #2 12-24-2006, 08:26 PM

it is not a linksys router. i have a wireless network going already. i was trying again for about an hour, and no luck again. thanks though

bullit67 · #3 12-24-2006, 10:27 PM

Marc

Do these things not work well with linksys routers ? or maybe not at all

Doug

Skimmerking · #4 12-24-2006, 10:43 PM

I to have a wireless ,not to insult you but you have to make sure that the address on the router is matching up with the address on your system. I found that out the hard way. I it wouldn't let me in until my brother told me about the address key..

good luck

and happy christmas

niloc16 · #5 12-24-2006, 10:53 PM

how the hell do you match the addresses?

bullit67 · #6 12-26-2006, 10:31 PM

Colin

have you tryed looking in the communication menu and set it to LAN it looks like it is set defualt to the serial port

niloc16 · #7 12-26-2006, 11:28 PM

i've done that with not luck what so ever. i found the wlan tutuorial on the disc and tried to follow it but when i get to the step where you use the LAN/WLAN connnection tool the screen pops up searching for the unit and it states 0 connected. if anyone has another idea i'm really open for suggestions.