|
|
|
|
|
#1
12-24-2006, 09:26 AM
|
|||||
|
|||||
"One thought I had is that it's very difficult to determine how well the mag2 is pushing water through the media."
The way i see it you doing everything right. lets waite and see. Perhaps you could put a "T" with a vlave in the recirculation line to see how much you actually recirculating (instead of blowing air in the unit).When you open that valve you could get an idea of how much flow you get or at least you know that Mag pump is has good flow. Other then that i thank you for keeping us informed. 
|
|
#2
12-25-2006, 05:42 AM
|
|||||
|
|||||
Unfortunately I don't have a recirc line on this reactor.
Anyhow I did blow some air in. Had to open my valve and reset it afterwards. But it did show the pump is running. Tomorrow is day 28 -- four weeks and counting. Nitrates still off the chart, nitrites still off the chart. I'm about ready to give up. I don't see any downward trend in the numbers. I don't see how reeferaddict could have such profound results in a month. Should have gone zeovit when I had the chance. My poor tank.  I suggest to anyone reading this, don't bother with sulfur denitrators, unless you're willing to wait 15 years to see results. At least for me it's just like the Calfo DSB in a bucket idea. .. it just doesn't work.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
Hybrid Mode
