Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 11-17-2006, 06:03 PM
GMGQ's Avatar
GMGQ GMGQ is offline
Member
 
Join Date: Sep 2005
Location: Vancouver, BC
Posts: 400
GMGQ is on a distinguished road
Default GVRD Boil-Water Advisory and our Reefs??

So how is this boil-water advisory gonna affect our tanks that use auto top-offs? Mine is fed from the RO/DI.

They say to boil it because there may be bacteria in the water. (It boggles my mind that we cant even brush our teeth with tap water right now!) I assume a RO/DI unit wont really take that stuff out? So are our tanks slowly festering in bacteria??
__________________
Gary
Tank was up for 7yrs and 10months. Thanks Everyone!

2016/2017 180Gallon Build Coming Soon...
Reply With Quote
  #2  
Old 11-17-2006, 10:15 PM
nater3 nater3 is offline
Junior Member
 
Join Date: Oct 2006
Posts: 1
nater3 is on a distinguished road
Default

Most bacteria can't take rapid changes in salinity due to their thin cell walls so I wouldn't worry too much.
But I'd wait for someone else to chime in, I'm no expert and have no reefkeeping experience.
Reply With Quote
  #3  
Old 11-17-2006, 10:55 PM
danny zubot's Avatar
danny zubot danny zubot is offline
Member
 
Join Date: Apr 2004
Location: Castlegar BC
Posts: 3,469
danny zubot is on a distinguished road
Default reply

Your RODI filter should remove all of the bacteria and other disolved solids that they are talking about. This period in GRVD will decrease the life of your filters, but thats what they're there for. Do you have a TDS meter? I would test your levels, and if they are still low then you should be ok.
__________________
THE BARQUARIUM:
55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's.

Fully stocked with fish, corals and usually some fine scotch
http://www.canreef.com/vbulletin/showthread.php?t=55041
Reply With Quote
  #4  
Old 11-17-2006, 10:58 PM
AC33's Avatar
AC33 AC33 is offline
Member
 
Join Date: Sep 2005
Location: Richmond, BC
Posts: 25
AC33 is on a distinguished road
Default

The only thing IMO that would be a problem would be the turbidity of our water, because our RO filters have a sediment filter. This may need to be changed soon if you plan to use the water coming out of your tap.
__________________
AC
Reply With Quote
  #5  
Old 11-17-2006, 11:18 PM
GMGQ's Avatar
GMGQ GMGQ is offline
Member
 
Join Date: Sep 2005
Location: Vancouver, BC
Posts: 400
GMGQ is on a distinguished road
Default

Interesting. I thought RO/DI's were meant to take out the solids in the tap water, not organics?


Quote:
Originally Posted by danny zubot View Post
Your RODI filter should remove all of the bacteria and other disolved solids that they are talking about. This period in GRVD will decrease the life of your filters, but thats what they're there for. Do you have a TDS meter? I would test your levels, and if they are still low then you should be ok.
__________________
Gary
Tank was up for 7yrs and 10months. Thanks Everyone!

2016/2017 180Gallon Build Coming Soon...
Reply With Quote
  #6  
Old 11-17-2006, 11:35 PM
Chad's Avatar
Chad Chad is offline
Member
 
Join Date: May 2003
Location: Surrey
Posts: 1,031
Chad is on a distinguished road
Default

I've turned off my feed to my RO/DI cuz I don't want to ruin my filters. However, I have a 50gal drum of RO/DI already made (constantly gets refilled by the RO unit) so, I am set for a week or so. I doubt the water advisory will last long. Its already being lifted in Coquitlam and Maple Ridge.
__________________
Chad

Reply With Quote
  #7  
Old 11-18-2006, 12:39 AM
Samw's Avatar
Samw Samw is offline
Member
 
Join Date: Nov 2001
Location: Yaletown Vancouver
Posts: 2,651
Samw is on a distinguished road
Default

Quote:
Originally Posted by GMGQ View Post
Interesting. I thought RO/DI's were meant to take out the solids in the tap water, not organics?
I guess it depends on the membrane that you bought: CTA, TFC, or High Removal.

http://www.drsfostersmith.com/produc...fm?pcatid=4467
Code:
Materials Removed CTA Percent(%) TFC Percent (%)
Hardness          93 - 95        93 - 97
Heavy Metals      94 - 96        95 - 98
Ammonium          85 - 90        80 - 90
Phosphate         85 - 97        95 - 98
Nitrate           50 - 70        90 - 95
Silicate          80 - 90        92 - 95
Bacteria          NA             >99
http://www.peteducation.com/article....articleid=2890

CTA - Cellulose Tri-Acetate membranes are organic and have a slightly lower TDS removal rate of 88-94%. Because they are organic, use them only with chlorinated water (water from a municipal source) in order to keep them clean and free of damaging molds and bacteria. They do not filter out chlorine, so allow the chlorine to dissipate out of filtered water, or treat it with a chemical dechlorinator.

TFC - Thin Film Composite membranes are synthetic and remove between 94-98% of TDS. These units contain a carbon pre-filter to protect the membrane from chlorine damage. Use these membranes for water with or without chlorine.

High Removal Membranes are synthetic membranes with much higher removal rates, between 97.5-99%, and are especially adept at removing silicates. These units also contain a carbon pre-filter to protect the membrane from chlorine damage. Use these membranes for water with or without chlorine.

http://www.algone.com/reverse_osmosis.php

The two types of membranes:

Cellulose Triacetate (CTA)
This film is acceptable for treating tap water that contains chlorine/ chloramine. In fact CTA needs an antibacterial substance in the water, as the film is not good in removing bacteria. CTA should not be used if the water is hard (500 ppm) or has a pH above 8.5

Thin Film Composite (TFC)
This film is acceptable for hard water and can filter out bacteria. It is also well suited in holding back nitrates, phosphates, and silicates. Chlorine/ chloramine on the other hand can not be tolerated. Using a TFC membrane with tap water (public water) you must pre-filter the water to eliminate chlorine/chloramine (i.e. carbon filter).

Last edited by Samw; 11-18-2006 at 01:02 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:43 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.