Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 07-25-2013, 04:08 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default DC return pump on Controller and Battery Backup ?

I'm sort of on the fence about replacing my 120vac return pump with a DC one
I currently use a Reefkeeper Elite controller

Is there a way to connect these new DC pumps with a battery backup, and still have it connected to my RKE controller ?
Reply With Quote
  #2  
Old 07-25-2013, 02:25 PM
craigwmiller craigwmiller is offline
Member
 
Join Date: Sep 2012
Location: Edmonton
Posts: 233
craigwmiller is on a distinguished road
Default

I have a similar setup but with one of my MP40's. On my RKEv2 I have one of my PC4's connected to a UPS, and my MP40 is plugged into a port on that PC4. I have the 'default' action for that PC4 port is to be ON.

Not to waste the PC4, I have another couple super-low-draw devices connected to the other 3 ports.
__________________
Single System Setup: 210G SPS reef, 225G FOWLR, 72G water change, 50G frag, 120G sump. I promise a journal at some point! (anyone need some coral frags? I likely always have stuff that is frag-ready)
Reply With Quote
  #3  
Old 07-25-2013, 04:27 PM
michika's Avatar
michika michika is offline
Member
 
Join Date: Nov 2004
Location: YYC
Posts: 5,063
michika is on a distinguished road
Default

Quote:
Originally Posted by gregzz4 View Post
I'm sort of on the fence about replacing my 120vac return pump with a DC one
I currently use a Reefkeeper Elite controller

Is there a way to connect these new DC pumps with a battery backup, and still have it connected to my RKE controller ?
Tagging along because I'm curious too. I also have an RKE and am using a DC pump on my OM 4-way. I did have it plugged into a battery back up and not the RKE at first, but I would really like to do both too.
__________________
+.-.+.-.+.-.+.-.+.-.+.-.+
I glue animals to rocks
Reply With Quote
  #4  
Old 07-25-2013, 04:56 PM
MarkoD's Avatar
MarkoD MarkoD is offline
Member
 
Join Date: Dec 2010
Location: Edmonton Alberta
Posts: 1,904
MarkoD is on a distinguished road
Default

Why do you need a return pump on a battery backup? If the skimmer,heaters, reactors etc are not running what's the point of keeping the return pump going?

Just use the backup for power heads. They use less power and will do more good
Reply With Quote
  #5  
Old 07-26-2013, 01:40 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by craigwmiller View Post
I have a similar setup but with one of my MP40's. On my RKEv2 I have one of my PC4's connected to a UPS, and my MP40 is plugged into a port on that PC4. I have the 'default' action for that PC4 port is to be ON.

Not to waste the PC4, I have another couple super-low-draw devices connected to the other 3 ports.
Have you ever tested your setup ? I see how it can work and like the idea
I would just set the one port to 'On' when it looses communication, and have the other 3 to 'Off' so they don't draw down the UPS

Ah, this would also keep the Head Unit powered
Interesting ...

Last edited by gregzz4; 07-26-2013 at 01:47 AM.
Reply With Quote
  #6  
Old 07-26-2013, 01:43 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by MarkoD View Post
Why do you need a return pump on a battery backup? If the skimmer,heaters, reactors etc are not running what's the point of keeping the return pump going?

Just use the backup for power heads. They use less power and will do more good
I have a battery backup for my MP10s, and that's good enough for the DT
They can run up to 36 hours

But, if the power goes out for a long enough time, I'd like to avoid die-off in my sump and 'fuge
Reply With Quote
  #7  
Old 07-26-2013, 01:49 AM
craigwmiller craigwmiller is offline
Member
 
Join Date: Sep 2012
Location: Edmonton
Posts: 233
craigwmiller is on a distinguished road
Default

Quote:
Originally Posted by gregzz4 View Post
Have you ever tested your setup ? I see how it can work and like the idea
I would just set the one port to 'On' when it looses communication, and have the other 3 to 'Off' so they don't draw down the UPS
Yes I've tested it a few times. I've even unplugged the head unit as a test, and it takes maybe 20 seconds to revert to defaults but it works great, and it hand failed during testing. We had a power outage a few weeks back and the 'real' test was good too.
__________________
Single System Setup: 210G SPS reef, 225G FOWLR, 72G water change, 50G frag, 120G sump. I promise a journal at some point! (anyone need some coral frags? I likely always have stuff that is frag-ready)
Reply With Quote
  #8  
Old 07-26-2013, 01:58 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

If anyone has an idea, I'd like to know of a way to run the pump on DC backup as I believe it will be cheaper to build my own rather than buy a UPS
Reply With Quote
  #9  
Old 07-26-2013, 01:59 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by craigwmiller View Post
Yes I've tested it a few times. I've even unplugged the head unit as a test, and it takes maybe 20 seconds to revert to defaults but it works great, and it hand failed during testing. We had a power outage a few weeks back and the 'real' test was good too.
Great, thank you Craig
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:39 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.