|
|
|
#2
05-13-2012, 10:01 PM
|
||||
|
||||
You will need to program the channels.. you need to at least program channel one, and use the same setting on channel 2 and
Sol blue uses 3 channels. Not sure about sol white, most likely just 2 channel.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 
|
|
#4
05-13-2012, 10:25 PM
|
|||||
|
|||||
|
Go into lighting set up in profilux, select special lamp and set up accordingly then you can use light settin 1,2,3 to set up the three different channels of AIs.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD  TOTM Fall 2013
|
|
#6
05-13-2012, 10:43 PM
|
|||||
|
|||||
|
That's it. Just plug your power into a always on socket or a wall plug.
I know it's so easy compared to everything else. J
|
|
#9
05-13-2012, 11:06 PM
|
||||
|
||||
|
Now, programs the channel 1-3.. Set the time and intensity for all 3 channels.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
Linear Mode
