|
|
|
#1
03-07-2012, 01:06 AM
|
|||||
|
|||||
humidity with led
So I'm going to be getting the 29g diy from mod led so no fan needed. Will humidity be a problem 6 inchs above the water with no hood? What if I add a hood? On a different subject if I add a red and green module should I put them on blue dimmer or white?
__________________
Can't is the cancer of happen - charlie sheen 20g reef 25g sump, DIY led form modular led, 2 false percs 
|
|
#2
03-07-2012, 01:13 AM
|
|||||
|
|||||
|
You should put a small fan on the heatsink to keep it completely cool for the sake of your LED's. Humidity should not be a problem just make sure you have a splash gaurs to protect the LED's from water splash.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#4
03-07-2012, 03:59 AM
|
|||||
|
|||||
|
Ideas for the cooling fan attachment?
Well you could use some heat resistant silicone or some loc-tite super glue jel to attach it to the heatsink or drill & tap some holes in the heatsink.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#6
03-07-2012, 04:13 AM
|
|||||
|
|||||
|
A simply clear acrylic piece heat formed to wrap up the 2 solid side of the heatsink attached with a couple stainless steel screws would do the trick.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
Linear Mode
