10g with Stand, Canopy & T5 lighting

Scythanith · #1 01-26-2010, 01:45 AM

Hello,

I have moved my Harlequin Shrimp to my coral tank and am looking to move my 10 gallon.

The stand/canopy is 3/4" plywood with a cherry stain. The tank is a standard AGA 10 gallon. The back 1/4 of the tank has been painted black to make it fade into the stand (see pictures below). The lighting is 2 x T5 with individual Icecap reflectors and an Icecap 430 ballast. This lighting is high end and isn't cheap, and can grow anything you can fit in the tank. If you don't want the lighting I can remove it and you can supply your own. The canopy is vented with two 4" fans, one feeding fresh air and the other venting hot air. The electrical is all concealed inside the canopy with the only access to the interior of the canopy at the back.

Entire setup: 10g AGA aquarium, stand & canopy, Icecap 430 ballast, 2 x Icepcap reflectors, Icecap standoffs, 2 x AquaScience blue T5's, 2 x stealth 4" DC fans with DC controller, powerbar.

Price $275

If you want it without the T5 setup (all lighting equipment stripped) then the price is $100.

Thanks for looking!

dsaundry · #2 01-26-2010, 10:17 AM

Pretty little tank,looks like you could almost put a liitle sump under it as well. Would be nice for a nano set up.

Scythanith · #3 01-26-2010, 04:27 PM

Yep, a 10g or a custom sump would easily fit under. I also left room for the plumbing incase I ever did drill the display. You'd just have to make sure you left enough room at the back of the tank for regular maintenance, etc.

Thanks for looking!