|
|
|
#1
04-15-2009, 04:52 AM
|
||||
|
||||
Bubble King question?
Anybody that has a mini BK 180? could you measure it for me and let me know what the minimum chamber size would be? Im really wanting one, but Im very limited for space in my sump and I really dont want to start removing baffles. Thanks
 
|
|
#2
04-15-2009, 05:15 AM
|
|||||
|
|||||
|
i have a 160 and my space was a bit small but the skimmer fit, problem i have is where the pump pulls water in is very close to the baffle and restricts flow if i move the skimmer at all, i dont know if the 160 and 180 have the same base size or not but id make shure you have at least an extra couple inches on the 1 side at least,
__________________
but what the heck do i know
|
|
#3
04-15-2009, 05:26 AM
|
||||
|
||||
|
what size is your sump compartment?
|
|
#4
04-15-2009, 12:58 PM
|
|||||
|
|||||
|
ill have to check after work, i think something like 7x10 or 8x10 might say in my build thread but i cant remember
__________________
but what the heck do i know
|
|
#5
04-15-2009, 02:38 PM
|
|||||
|
|||||
|
Here's a thread with some pictures of the mini 160 showing the overall dimensions:
http://reefcentral.com/forums/showth...&highlight=160 I have mine in a space that is 12" x 11" with a 9" water height. I also have a heater and my 3 return lines in there though so it's a snug fit and as i have crabs mentioned you don't want to have the intake too close to any side of the sump. If you end up getting a 180 make sure you get a gen 2 with the enlarged volute - some retailers are still selling gen 1 models unfortunately.
__________________
SPS Dedicated 24x24x20 Trimless Tank | 20 g Sump | Bubbble King Mini 160 Protein Skimmer w/ Avast Swabbie | NP Biopellets in TLF Phosban Reactor | ATI Sunpower 6 x 24W T5HO Fixture | EcoTech Vortech MP20 | Modified Tunze Nanostream 6025 | Eheim 1260 Return Pump | GHL Profilux Standalone Doser dosing B-Ionic | Steel Frame Epoxy Coated Stand with Maple Panels embedded with Neodymium Magnets "Mens sana in corpore sano"
|
|
#6
04-15-2009, 08:27 PM
|
||||
|
||||
|
BK Mini 180
Footprint: 11" x 12", add a bit to the 11" to allow for unrestricted intake draw Height: 22" Body/Cup Diameter: 7" Cup Height w/ Lid: 7.5" Bubble Plate Diameter: 6" Pump: RD 1000 - 1200 lph Air/2000 lph Water @ 28W
__________________
This and that.
|
|
#7
04-15-2009, 09:27 PM
|
|||||
|
|||||
|
thank god for albert. you did forget to add ..kablow
my compartment 11.5x9.5 an extra 0.5-1" would have been nice on the 9.5 side
__________________
but what the heck do i know
|
|
#8
04-15-2009, 09:33 PM
|
||||
|
||||
|
Those measurements were taken on a square. If you angle the unit, you might be able to cheat in a little more wiggle room.
__________________
This and that.
|
|
#9
04-15-2009, 09:59 PM
|
|||||
|
|||||
|
what was yoru compartment size I to i have a small compartment in my sump and i fit a mini bk 200 my compartment was 13x15
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
Linear Mode
