Aquarium and Stand as is

[GreenSpottedPuffer]

My current display is a bit of a "Frankenstien" tank IMO. It really needs to be rebraced I think. The previous owner never used the tank at all but did remove the top trim and bracing. I added a few cross braces which have held up fine for a year now...but if I were keeping the tank any longer, I would have eurobraced the tank.

Tank is about 72"x19"x18"ish. I have the water level a little lower now though. Drilled with 4-2" bulkheads, 2 on one end and two in the middle "back". There are two scratches down the "back" of the tank. Not really that noticeable if you use that as the back of the tank. Black silicone. Glass is 5/8" sides and 1/2" at least bottom (might be thicker).

Would come with a 2x4/2x6 stand that will need to be skinned or finished. I also have a few never used 2" bulkheads.

I was just going to take the tank apart and actually use one panel for a non aquarium related project but my fiance is telling me to at least try selling it first.

You have to come pick it up end of February. I am not going to be too flexible on this since I personally would rather just take the thing apart and use the glass for other things.

$200 with the stand.

I should mention this tank would be IDEAL for a wicked sump! So without the stand I will go $180