|
|
|
#2
12-07-2006, 09:14 AM
|
||||
|
||||
You should be fine using the PVC glue, just make sure every thing is nice and dry before you put water throught it, basicly all that glue does is melt the pipes together.
__________________
\"Your mothers wrong kid, being afraid of the dark is what keep\'s most of us alive.\" 
|
|
#3
12-07-2006, 02:13 PM
|
|||||
|
|||||
|
Agreed- normal PVC glue is fine. But if you are gluing PVC to bulkheads you may need to use a different glue for PVC and ABS, as that's what bulkheads tend to be made of. You'll find this glue right next to the PVC glue at any Home Depot or Rona.
|
|
#4
12-08-2006, 09:00 AM
|
||||
|
||||
|
I forgot about bulk heads, thats right, When I plumbed my tank to a sump I just used a little silocone around the bulk head after screwing in a small extension, I found it was eiseier to screw the extension in then having to glue it all together. Made it easier when I had to take the tank down.
__________________
\"Your mothers wrong kid, being afraid of the dark is what keep\'s most of us alive.\"
|
Linear Mode
