Flow in tank

[whaase]

I'm trying to get more flow in my tank without the need for too many powerheads (Should have done a closed loop). I'm thinking about using a SQWD with a pump around 1000-1200gph. Would this eliminate the need for any or at least some powerheads?

Walter

[mr_alberta]

A closed loop will definately help you rid your tank of some powerheads. A SCWD with a nice pump like a Blueline NS1100 or a CSL T4 would be pretty sweet.

[whaase]

Originally Posted by newguy

A closed loop will definitely help you rid your tank of some power heads. A SCWD with a nice pump like a Blueline NS1100 or a CSL T4 would be pretty sweet.

It would have to be a submersible pump.... I just don't have to room for a inline...

Walter

[medican]

these are great

http://www.oceansmotions.com/

[whaase]

Might be a little to much for my 30g

Anyone know the rough dimentions of a mag12 or a QuietOne 4000?

Walter

[Aquattro]

Maybe one of those Seio pumps would be enough...

[whaase]

Originally Posted by reef_raf

Maybe one of those Seio pumps would be enough...

Ohhh, don't say that! I have one and I've had nothing but problems since I got it... as a matter of fact, it is sitting in a closet. I can't get it to start up again.

Walter

[vanreefer]

When I unplug one of my M620's it takes a little while to get going again... sometimes I unplug it and replug it then it starts...

[sumpfinfishe]

My returns enter the tank via a scwd hooked up to a Mag3 on a 27gl with good flow, so i'm sure if you hooked a scwd up to say a Mag7 or 9 you would have plenty of flow and could eliminate a few powerheads. I also run a MJ1200 on a timmer every half hour just to mix up the flow a little.

[Snappy]

Originally Posted by medican

these are great

http://www.oceansmotions.com/

Now those are cool.