Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 11-04-2004, 05:54 AM
EmilyB's Avatar
EmilyB EmilyB is offline
Member
 
Join Date: Mar 2002
Location: Scenic Acres NW Calgary
Posts: 4,253
EmilyB is on a distinguished road
Default Aquasafe ?

The output on my 6 stage RO/DI has shut down to nothing in less than two months. At first it was crappy and I bought a booster pump, which doubled my outflow, but now it's back to basically nothing.

I do go through a lot of water so I was thinking some of my filters might be plugged, but now I can't find Aquasafe on ebay or a website url.

Can someone direct me to them ?
Reply With Quote
  #2  
Old 11-04-2004, 06:16 AM
muck's Avatar
muck muck is offline
Member
 
Join Date: Mar 2004
Location: Edmonton, AB (West)
Posts: 4,329
muck is on a distinguished road
Default

Address for there ebay store:

http://stores.ebay.com/The-Aqua-Safe-Pure-Water-Shop


Address for there website:

http://www.aquasafecanada.com/

HTH
Reply With Quote
  #3  
Old 11-04-2004, 06:48 AM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

When that happens to me, I go to Wal-mart and get a new 5 micron prefilter. Mine clog often, especially in the summer. My cartridges are clear, so I can see when the filter is dirty.
__________________
Brad
Reply With Quote
  #4  
Old 11-04-2004, 07:41 AM
hockey nut's Avatar
hockey nut hockey nut is offline
Member
 
Join Date: Apr 2004
Location: surrey, B.C.
Posts: 579
hockey nut is on a distinguished road
Default

Can you back flush your system? Some units come with a back flush option.
__________________
I bent My Wookie
Reply With Quote
  #5  
Old 11-04-2004, 03:18 PM
Willito's Avatar
Willito Willito is offline
Member
 
Join Date: Nov 2003
Location: Calgary
Posts: 443
Willito is on a distinguished road
Default ro

Aquasafe recommendations are pretty accurate. That is, on average use of 5g/day, the filters are to be changed every 6 months. Recently I came across the same problem where the output water was reduced to almost nothing. It puzzled me for days, I checked pratically every parts, and then it occurred to me to read the instructions. What do you know, changing all the filters fixed the problem. The filters were into the sixth month of use and I had lost track of time. I guess with someone like myself who doesn't own a TSD meter, keeping track of gal/day usage can be helpfull in determining when to change filters.

In your case Deb, clogging after two months is quite a fast rate. You must be using 10-15gal/day. Any idea how much per day you're using.
Reply With Quote
  #6  
Old 11-04-2004, 04:18 PM
Chad's Avatar
Chad Chad is offline
Member
 
Join Date: May 2003
Location: Surrey
Posts: 1,031
Chad is on a distinguished road
Default

Does anyone know if there is a "counter" available that can say how many gals of water have been produced?
__________________
Chad

Reply With Quote
  #7  
Old 11-04-2004, 04:35 PM
LostMind LostMind is offline
Member
 
Join Date: Jul 2003
Location: Port Moody
Posts: 821
LostMind is on a distinguished road
Send a message via ICQ to LostMind
Default

You guys actually get 6 months out of your filters?! Damn. I have to change my filters every 3 - 4 weeks. the prefilter gets soooo clogged up so fast out here.

my output gets cut in half after a week of making 15g per day. My psi will slowly drop from 65ish to 30.... down to 10 in a month if I let it.
Reply With Quote
  #8  
Old 11-04-2004, 04:55 PM
Willito's Avatar
Willito Willito is offline
Member
 
Join Date: Nov 2003
Location: Calgary
Posts: 443
Willito is on a distinguished road
Default RO

Calgary water is quite clean. Six months is stretching it a bit, but five months for sure at 5g/day.
Reply With Quote
  #9  
Old 11-04-2004, 06:30 PM
EmilyB's Avatar
EmilyB EmilyB is offline
Member
 
Join Date: Mar 2002
Location: Scenic Acres NW Calgary
Posts: 4,253
EmilyB is on a distinguished road
Default

Well, I figure I use up to 15 gallons a day , so it's probably just cartridge time. I do have a backflush and use that regularly.

I hope I can switch the clear cannisters onto the unit so I can see the filters more easily.

I do have a TDS meter and it stills reads zero tho? So I'll start with the sediment filter.

Thanks guys.
Reply With Quote
  #10  
Old 11-04-2004, 07:25 PM
Willito's Avatar
Willito Willito is offline
Member
 
Join Date: Nov 2003
Location: Calgary
Posts: 443
Willito is on a distinguished road
Default ro

LostMind, it seems like an expensive hobby for you just to obtain clean water. Changing filters every month is something I'd hate to deal with

Deb, TSD meters, and eletronic measuring devices alike, are tools that require period calibration. I have little trust in them myself. Their readings are highly dependent on the calibration as well as the power supply. IMO, the human senses are sometimes a better tool.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:06 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.