Light Question.

Titan445 · #1 06-06-2014, 09:48 PM

Hey can reefers, I have a 48" Tech 8 bulb lighting system and the 4 lights in the center are not working, thinking the ballast is pooched. I also have a 36" Tech 6 bulb lighting system. That runs fine, Could i steal one of the balast from the 36'' and use it for the 48''? Any help would be great thanks everyone.

hope this is in the correct posting spot.

pinkreef · #2 06-06-2014, 10:52 PM

My ballasts have a maximum wattage written on them.

Titan445 · #3 06-09-2014, 04:10 PM

matt_C · #4 06-09-2014, 04:51 PM

I wouldn't use the ballast from your other light.
A workhorse 7 would work well. I believe they are about 40 bucks at any electronic store.

Titan445 · #5 06-10-2014, 02:48 PM

Thanks, I will look into that, hopefully i can find one.

Rory · #6 06-11-2014, 03:03 AM

Speaking as an electrician, you don't want to throw in any old ballast. You pretty much have to take a picture of your current ballast and go to a wholesaler or possibly can tire etc. and match up the exact same specs. Brand does not matter.

Sent from my iPhone using Tapatalk

Titan445 · #7 06-11-2014, 10:25 PM

ok thanks guys for the info, appreciate it