Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2014, 05:50 AM
Sasq40 Sasq40 is offline
Member
 
Join Date: Mar 2014
Location: Grande Prairie
Posts: 142
Sasq40 is on a distinguished road
Default Drilling, should I be concerned about strength.

So I've done all the test and the bottom of my tank doesn't appear to be tempered so I'm going to attempt drill it. Now I'm kind of wondering if I should be concerned about these holes weakening the glass and causing a issue down the road. I plan to have a centre over flow with a 1.5 drain and two 3/4 returns. Will these holes cause any issues of concern related to strength and possibility of something happening down the road.?
Reply With Quote
  #2  
Old 04-03-2014, 12:54 PM
mark's Avatar
mark mark is offline
Member
 
Join Date: Nov 2002
Location: Edmonton AB
Posts: 4,212
mark is on a distinguished road
Default

if not drilled too close to the edge or either other, no problem.

might want to rethink number of drains, going 2 for herbie or 3 for bean will guarantee silence
__________________
my tank
Reply With Quote
  #3  
Old 04-03-2014, 01:36 PM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

Quote:
Originally Posted by mark View Post
if not drilled too close to the edge or either other, no problem.

might want to rethink number of drains, going 2 for herbie or 3 for bean will guarantee silence
+1

Don't worry about strength of glass if you are not drilling close to the edge of the glass. But definitely re-think your drains. I would do 2 X 1.5" or 2 X 1" drains. You should always have an emergency drain. I can't count how many times one has saved me from an overflow.
__________________

They call it addiction for a reason...
Reply With Quote
  #4  
Old 04-03-2014, 01:51 PM
Sasq40 Sasq40 is offline
Member
 
Join Date: Mar 2014
Location: Grande Prairie
Posts: 142
Sasq40 is on a distinguished road
Default

My plan was to do a Durso Standpipe in my centre overflow, from what I've read dual Durso are hard to tune and generally don't work?

Sent from my SM-N900W8 using Tapatalk
Reply With Quote
  #5  
Old 04-03-2014, 01:57 PM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

Just drill a second hole for an open top pipe that will sit about the top of the overflow teeth in case anything were to clog your durso.

You don't need to have an active secondary durso by any means. But a Herbie style drain will be safer and more on the quiet side than a durso.
__________________

They call it addiction for a reason...
Reply With Quote
  #6  
Old 04-03-2014, 01:58 PM
Sasq40 Sasq40 is offline
Member
 
Join Date: Mar 2014
Location: Grande Prairie
Posts: 142
Sasq40 is on a distinguished road
Default

Good thinking, I'll throw another 1.5 bulkhead on my order

Sent from my SM-N900W8 using Tapatalk
Reply With Quote
  #7  
Old 04-03-2014, 02:00 PM
WarDog's Avatar
WarDog WarDog is offline
Darth Moderator
 
Join Date: Mar 2013
Location: Maple Ridge, BC
Posts: 3,106
WarDog will become famous soon enough
Default

Quote:
Originally Posted by FishyFishy! View Post
+1

Don't worry about strength of glass if you are not drilling close to the edge of the glass. But definitely re-think your drains. I would do 2 X 1.5" or 2 X 1" drains. You should always have an emergency drain. I can't count how many times one has saved me from an overflow.
+100
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:00 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.