Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 04-14-2015, 07:54 AM
hunggi74's Avatar
hunggi74 hunggi74 is offline
LOVES STAR WARS... mostly Ewoks and Porgs.
 
Join Date: Mar 2011
Location: Richmond, BC
Posts: 359
hunggi74 is on a distinguished road
Default

Quote:
Originally Posted by TimT View Post
Have you added any new fish or corals/liverock lately?

What salt mix are you using? When was the last water change? Do you use RO water? When were the pre filters changed? Any idea on the TDS of the effluent?

Can you check your ammonia, nitrite and copper?

Has there been any dry cleaning or carpet cleaning done recently? Any fumigation or painting etc.
Easy Tim!! Lol! You sure you went to Hawaii and not Guantanamo?
I'm kidding! Tim is right, any chance any aerosol cleaning agents may have been used around your tank recently.
And it doesn't look like AEFW in your Revive water.
__________________
Illuminata 57gallon rimless <-- this is a lie!
Reply With Quote
  #2  
Old 04-14-2015, 08:54 AM
jason604 jason604 is offline
Member
 
Join Date: Mar 2013
Location: vancouver
Posts: 784
jason604 is on a distinguished road
Default

Quote:
Originally Posted by TimT View Post
Have you added any new fish or corals/liverock lately?

What salt mix are you using? When was the last water change? Do you use RO water? When were the pre filters changed? Any idea on the TDS of the effluent?

Can you check your ammonia, nitrite and copper?

Has there been any dry cleaning or carpet cleaning done recently? Any fumigation or painting etc.
i added 2 fishes into my new tank b4 i swapped everything from my old tank over. and 5 more new fishes last week, but my sps were rtn before those 5 fish were added. I moved over 10-15% of live rock from my old tank over and the rest is rock that i bleached and acid bath so its super clean and cycled for 2 months b4 using. I use only RO water and filters are still relatively new.. about 2 months old filters. TDS before RO is about 11 or 12 i think and ro output is always 0ppm. My last water change was on sat cuz my hawaiian feather duster got killed by my cleaner shrimp. i did tear down some drywall while the tank was empty but it was cleaned properly and did paint the walls when the tank was running with some livestock in my fishroom but i was careful and did cover the tank. Painting was done 2 months ago so that should be ruled out. Havnt checked ammonia and dont have a kit for copper but my nitrite is 0.

Quote:
Originally Posted by hunggi74 View Post
Easy Tim!! Lol! You sure you went to Hawaii and not Guantanamo?
I'm kidding! Tim is right, any chance any aerosol cleaning agents may have been used around your tank recently.
And it doesn't look like AEFW in your Revive water.
no aerosols been used

R u sure cuz i saw tiny oval things move slowly in circles in still water.
__________________
My 110g In Wall Tank Build
http://www.canreef.com/vbulletin/sho...d.php?t=111228
Reply With Quote
  #3  
Old 04-14-2015, 02:04 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

In all your pics, I see a bunch of what was dry rock (or appears that way since it's shock white with diatoms growing on it). When did you switch the tank over? Did you use new sand or old sand? How long was the new tank running before you moved the corals over? Did you use any bacteria products to help the new tank? If so, which ones? I'm thinking it's "new tank with dry rock syndrome" (yes I made that up).
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #4  
Old 04-14-2015, 02:26 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Quote:
Originally Posted by Myka View Post
I'm thinking it's "new tank with dry rock syndrome" (yes I made that up).
I like it
__________________
Brad
Reply With Quote
  #5  
Old 04-14-2015, 04:29 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Agreed ^
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #6  
Old 04-14-2015, 04:39 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

My 180, full of SPS, ran at 1050ppm Mg for it's entire existence. I didn't have any issues with corals. The Mg value here is not the problem.

I also started my new tank with dead/dry rock, new water, new sand and 60 SPS frags. All did well at the same values OP has posted, and color and tissue stayed on the pieces. Higher PO4 eventually retarded growth, but never lost any tissue/color on a brand new setup with everything dry. Again, while not optimal in my opinion, not the problem here.
__________________
Brad
Reply With Quote
  #7  
Old 04-14-2015, 04:59 PM
Ryanerickson's Avatar
Ryanerickson Ryanerickson is offline
Member
 
Join Date: Oct 2012
Location: Mission, BC
Posts: 703
Ryanerickson is on a distinguished road
Default

I agree the mag is not the issue just not ideal either, low mag I find effects torches hammers (don't inflate well)I would guess Jason's issue is phosphates but who knows seems like you are always having issues.
Reply With Quote
  #8  
Old 04-14-2015, 05:47 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Quote:
Originally Posted by Ryanerickson View Post
I would guess Jason's issue is phosphates
I would have previously agreed, but my current tank hit 0.47ppm PO4 and the corals never looked better

I would guess some type of contaminant or a nasty bacteria maybe? I think water chem for standard items is ok.

Problem with this case is everything looks ok, so really hard to tell by a snapshot described in an online thread.
__________________
Brad
Reply With Quote
  #9  
Old 04-14-2015, 06:01 PM
jason604 jason604 is offline
Member
 
Join Date: Mar 2013
Location: vancouver
Posts: 784
jason604 is on a distinguished road
Default

Quote:
Originally Posted by Myka View Post
In all your pics, I see a bunch of what was dry rock (or appears that way since it's shock white with diatoms growing on it). When did you switch the tank over? Did you use new sand or old sand? How long was the new tank running before you moved the corals over? Did you use any bacteria products to help the new tank? If so, which ones? I'm thinking it's "new tank with dry rock syndrome" (yes I made that up).
I swapped my tank about a month and a half ago. I used 99% new sand. Rock was acid and bleached then cycled in a bin for 2-3 months before I used it. I then put in new tank with about 90% new salt water and 10% from old tank with a half cup of clean sand from old tank each week during water changes to help it cycle for 1.5 months before I swap everything over. I did not use any bacteria products since i watched it cycle to no nitrite nitrate and ammonia.

Quote:
Originally Posted by Ryanerickson View Post
I agree the mag is not the issue just not ideal either, low mag I find effects torches hammers (don't inflate well)I would guess Jason's issue is phosphates but who knows seems like you are always having issues.
I bought schlobster chloride and sulfate from JL but have not used it yet since I still have some seachem but I guess I should just toss seachem Cuz I can't ever seem to increase mag safely with it pass 1150. I think I should carefully test hanna kit multiple times to make sure it's correct. Al my LPS are super duper happy and colorful it's just some sps r affected. My digis, birdnest, monti plates are doing fine but I guess they are less demanding. Yes I am constantly having problems with my tank n tossing $$ out the window n this has got to stop. That's why I was asking if somee1 can come over and look at my setup n my reef keeping regime to point me into the right direction. U will be compensated as well as filled with beer =). At this point I'm pretty bummed with my constant failures in this hobby. If Im unable to correct things and my sps end up all dying I might just do a full LPS and softy tank even tho I love sps much more.

Quote:
Originally Posted by reefwars View Post
It's simple.....you need more super glue
Oh if only I can count how many super glue tubes Ive been through lol. Each time I go dollar store the cashier is always shocked n ask like what am I doing with that many lol.

So is it confirmed that there wasn't any AeFW in my after dip container?
__________________
My 110g In Wall Tank Build
http://www.canreef.com/vbulletin/sho...d.php?t=111228
Reply With Quote
  #10  
Old 04-14-2015, 06:11 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Quote:
Originally Posted by jason604 View Post

So is it confirmed that there wasn't any AeFW in my after dip container?

didn't appear to be any in the pic..
__________________
Brad
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:54 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.