|
|
|
#62
10-08-2010, 10:29 PM
|
|||||
|
|||||
well that suck that sea star won't notch a tank. for mine I did it with a glass cutter and a template to follow. you can't run corners with a glass cutter so it is a big curve.. then I used the dremmel to shape it. going to be a lot harder to use a glass cutter on the thicker glass you will have.. talk to the glass smith.. they have glass grinding router bits... might be an option.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. 
|
|
#63
10-08-2010, 10:37 PM
|
|||||
|
|||||
|
Ya, I certainly wouldn't use a glass cutter
 Japarto suggested a cutting disk, he's used one before without problems. Victoria Glass might also do it. Worst case, I'll drill it and run an internal box. Not a huge deal, if it's going to be easier.
__________________
Brad
|
|
#64
10-09-2010, 06:06 PM
|
|||||
|
|||||
|
Quote:
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
Linear Mode
