Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

Reply
 
Thread Tools Display Modes
  #21  
Old 07-29-2010, 04:21 PM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

I dont vacume the substrate but I do use a turkey baster to blast some of the settled detritus off of my rock and coral when i do a water change. I also always give new saltwater at least overnight to completely dissolve with a powerhead in the bucket before I use it.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour
Reply With Quote
  #22  
Old 07-29-2010, 10:06 PM
krg krg is offline
Junior Member
 
Join Date: Jul 2010
Location: Brooks
Posts: 14
krg is on a distinguished road
Default

Mike,
So you think a 'hang-over-the-side' skimmer is a good way to go?? I'll check into it! I actually just got back from my excursion to Calgary. I planned on going to Gold's but..he was closed. I actually caught him bringing stuff in. The lights were off but he told me I could go in and take a quick look around. From what I can see..it looks like a pretty decent store. I then went to Big Al's. It's a pretty big store, fairly impressive tanks. All of the tanks looked good, no algea or anything like that. No casualties, all around a good store. The only thing I kind of question is..A lot of younger adults working there(I'd say 18-24ish, just a guess), and I wonder about their knowledge. How much do they know? Are they going to blow smoke up my butt? I guess I shouldn't judge them, I'm just curious if they can answer any questions I may have. I noticed their prices are pretty close to here in Brooks so..I'll just buy some things locally(Powerheads, for example).
A question about mixing a batch of saltwater and letting it sit overnight. Are you just using a regular powerhead? Are you suctioning it to the pail, or magnet? That brings another question..I believe those are two of the types..magnet and suction..is one any better than the other? I believe the one I'm looking at here at home is a magnet, and the one I was looking at in Calgary is a suction-type. Which is the better way to go?
Back to Mike,
So, are you saying that since you hooked up a protein skimmer you are running corrals now, instead of FOWLR? Will a skimmer really do THAT much for me? I'm not sure if I want to have corrals in this tank but if a skimmer gives me the ability too..I'll buy one for sure. If for nothing else than to make my water quality that much better!!
My 60ga tank is a homade jobbie(not by me), and is pretty decent. I was thinking because I have room underneath(whereas with my 77ga I don't), I could maybe put a sump underneath. Now..is it true that I'll need holes drilled in the base of the tank for the sump? Is it possible to have a sump without drilling into the tank? If it's not possible I'll probably just leave the tank as-is and keep it a freshwater tank, and eventually buy a bigger tank set up for a sump. At least, that's the thought in mind.
Anyway, thanks for letting me ramble on. I look forward to more replies. In the meantime..I think I'm going to go to my LFS and see what's going on around there. Thanks again, everyone..take care!!!
Kennan
Reply With Quote
  #23  
Old 07-30-2010, 12:27 AM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

There are far more in-sump skimmers to choose from than there are hang-ons... Many of the inexpensive hanging ones are crap so do some research before buying.

I just have a regular powerhead sitting on the bottom of a garbage can. That is all that is needed to mix up new saltwater. However some people go a step further and add an airstone and maybe a heater but those aren't needed in my opinion.

Magnet holding systems are better in my mind than suction cup hangers for holding powerheads. Calcifying organisms and algae will eventually cause suction cups to fail while magnetic mounts aren't effected by such things.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour
Reply With Quote
  #24  
Old 07-30-2010, 12:41 AM
krg krg is offline
Junior Member
 
Join Date: Jul 2010
Location: Brooks
Posts: 14
krg is on a distinguished road
Default

Awesome!! I think I know the powerhead I'm going to buy then..THANKS!!! I'll do some checking as far as the skimmers go. I find out what my local store carries, check out the web-site(s) and tell you guys as well. I'll get it figured out..I hope Thanks again! Take care,
Kennan
Reply With Quote
  #25  
Old 07-30-2010, 06:00 AM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

I use AquaClear powerheads with the 'hang on the side' bracket as well as a heater when mixing new water in a rectangular rubbermaid type plastic tub. Generally allow it to mix for a couple of days and put the heater in the day before the actual water change. I like to match the temp and salinity of the new water as close as possible for adding since I have to add to the display due to being sumpless at the moment.

The skimmer I'm using as mentioned is a DIY that came with the system and as soon as I figured out how to use it, I powered it up. Many folks run systems successfully without skimmers, but I think it involves more frequent water changes to keep the quality to a point where it's livable for the inhabitants. Personally, even if I was running FOWLR, I'd still be using the skimmer. Tanks with plenty of fish produce more 'crap' and protein for a skimmer to skim. Make sure you do plenty of research before jumping on to the skimmer bandwagon. There's a lot of stuff out there and all have their pros & cons. You can easily spend and extra grand for the latest and greatest which may only improve performance over an older model marginally. And yes, there are some very junnky ones out there too. There are times when good is good enough. If money is no object, knock yourself out, ha ha.

I used a Remora C HOB with a Mag 3 pump for a while since it came with another used system I purchased. Why am I back to the dated technology of a DIY wooden air stone skimmer? Frankly the Remora didn't work well for me at all. It was incredibly noisy and only ever produced a mild tea coloured skimmate. The only good thing about the Remora was that I could fit it in between the wall and the display.

Since modifying my old skimmer with a monster DIY wooden air stone and upgrading the air pump, it's working better than ever. I run it fairly dry so it takes a while to fill up the plastic bottle I use to collect the liquid skimmate, but the dry paste I scrape out of the collection cup every week is testament to the good job it does. And it does it silently and with very low power consumption, maybe 15 watts total with the air pump and small AquaClear powerhead. I'm pretty sure my next build with basement sump will include another DIY skimmer with wooden air stone, but I'll make it at least a six footer since there will be no limitation with respect to room. IMO there's no substitute for contact time with skimmers and the best way to get that is slow flow with a very long tube.

Here are several photos. I also built a dedicated side stand for it since I didn't actually like hooking it on the side of the tank. This necessitated further modifications in the form of a longer return line. The pics are a little dated showing the older air pump and using store bought air stones.


Here's the stuff that will need to be exported by other means without a skimmer. And this is old school, so take it from there. I'm getting much nastier stuff after my mods.

__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
  #26  
Old 07-30-2010, 04:15 PM
Jfish Jfish is offline
Member
 
Join Date: Jan 2010
Location: Estevan, Sask
Posts: 56
Jfish is on a distinguished road
Default

I usually mix up my water in a rubbermaid bin three or four days before a water change. I just leave a powerhead (koralia2) and heater dangling in the tub for a couple days to get it mixed up good. Any powerhead will due but I like the magnet type. When it comes time for the water change, I shut off all the pumps, blow off all the rocks, and suck the visibly crappy looking stuff off the top of the sand without disturbing the bed as a whole too much. Occasionally I will stir a small portion of the sandbed during the process too. After that I just pour the mixed water into the sump and let it mix, temp adjust with that water for a while and turn the pumps back on. I usually wash the skimmer cup in the dirty aqaurium water, give the inside of the skimmer a good wipe with paper towl or rags and thats it.

When it comes to skimmers I would just suggest going big. Skimmers are usually overrated for the size of tank they can handle and not that many people have lightly loaded tanks. My aquaC is rated for 180 gallons and I have a 75 gallon with 25 gallon sump. I don't think overskimming is really an issue so i'd rather have too much than not enough. And when it comes time for a bigger tank I might not have to worry about a skimmer right away. I think the skimmer does keep that water quality very high and pulls nasty dark crud outta the tank. If you get a good quality skimmer and fair amount of good quality live rock it will save you a bit of grief down the road. Add some good lights and flow and your not far off a full blown reef.

I was a little overwhelmed when first decieded on a sump but im glad I took the time to figure it out and I would never go back. To run the sump you either need a hang on the back overflow or drill your tank. I've never ran a hang on the back overflow but they require some form of siphon tube and I think can be a little worrysome. Im sure with regular maintenance and basic understanding a hang on the back can work just as good as drilling your tank.
Reply With Quote
  #27  
Old 07-30-2010, 08:49 PM
krg krg is offline
Junior Member
 
Join Date: Jul 2010
Location: Brooks
Posts: 14
krg is on a distinguished road
Default

Well..I just took my latest readings, and I'm a little surprised. I'll be the first to say that, I'm lazy. I'd love to have an imaculate tank like many of you have. Without a sump, and without a skimmer..I just don't know how possible that is. I have some algae growing(red and green) that I haven't stayed on top of, and I have some things growing that I don't know what they are. They kinda look like a cross between plants, and weeds. I also think I may have bristleworms. I have little crawlie..somethings. They look like little larvea of something. Well..i'd say like a wee little centepede, not really a worm. My water changes are infrequent and as you read earlier..I'm not even sure what I'm vacuuming or doing when I do a water change. I haven't added any salt to my tank in months. I've only topped up my tank with RO water when it's evaporated. And with all of this my readings are good.
PH:8.2
Amonia:0
Nitrite:0
Nitrate:0
Phosphate: .5
Salinity:1.023
Temp: 80.4
I'm not doing much, and it seems to be working. As I said..I'd like to have a tank worth showing off, I just got to get off my lazy rear-end, and maybe buy a skimmer and powerheads, etc..etc..
As I read your posts, I realise how very little I know, and how much work I should be doing. Any thoughts??
Take care everyone,
Kennan
Reply With Quote
  #28  
Old 07-30-2010, 08:51 PM
krg krg is offline
Junior Member
 
Join Date: Jul 2010
Location: Brooks
Posts: 14
krg is on a distinguished road
Default

I'm going to check on a -hang-on-the-back sump and see if it can work for me. As well as a skimmer. I might be able to do this yet...
Reply With Quote
  #29  
Old 07-30-2010, 09:33 PM
Jfish Jfish is offline
Member
 
Join Date: Jan 2010
Location: Estevan, Sask
Posts: 56
Jfish is on a distinguished road
Default

Well just because you have good readings doesn't mean your in the clear. The red and green algea you speak of and weed like things (hair algea maybe) grow off of excessive nutrients in your tank. They are consuming the nitrates/phosphates in your tank and will keep growing until you reduce the amount of nutrients. Cyanobacteria may also be growing, its a red/purple slime that grows on anything when nutrients are low and flow is low.

The tiny worm like things sound like copeods or amphipods which are tiny little inverts that live in the rocks and sand. These along with bristle worms are beneficial life thats starting to grow in your tank.

You should never have to add salt directly to the display tank. Salt will not evaporate out of your tank so you should only have to add RO to keep your salinity right. Only time you need salt is when mixing water for a change.

Im sure there are people with very successful tanks that go no sump no skimmer. Lots of good quality live rock can provide enough beneficial bacteria to sustain a system. Thats why live rock is one of the best investments you can make in your aquarium. But since your just starting out its probably best to do as much research as possible and have all the tools neccessary before you try it with the bare minimum.
Reply With Quote
  #30  
Old 07-30-2010, 10:06 PM
krg krg is offline
Junior Member
 
Join Date: Jul 2010
Location: Brooks
Posts: 14
krg is on a distinguished road
Default

Thanks for the advice!!
I just got back from my LFS and was checking out a skimmer. Is anybody familiar with an ESHOPPS PSK-100H? I'm going to do my research this weekend and maybe buy it next week(as well as a powerhead). Thanks again for the advice. I'll post more in the next day or so!! Take care,
Kennan
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:55 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.