Aquaforest probiotic method

[dcw1sfu]

Originally Posted by brisco

reliable information is the key. I have a 100 gal mixed reef. The SPS component consists of smaller acros, various monti's, and birds nests but I am looking to grow this part of the reef. I have numerous LPS as well and then for softies I have some toadstools, colt/Kenya, and Zoas. I am trying to keep everything happy. Currently use IO reef salt, but I am considering switching to Aquaforest. I dose Ca, Alk and Mg automatically. Then trace elements, acro power, and MB7 by hand somewhat sporadically. I also run a protein skimmer, RowaPhos, Hydroton, and NitraGuard. Heavy bioload system. So which salt is best for me? I am trying to run ULNS. I am away a lot, so can't do a zeo tank or anything that needs daily attention, it needs to run itself for upto 4 days. Any thoughts?

I personally prefer the probiotic over the reef, however, I'm running full aquaforest. You could use either, however, probiotic has the benefit of the added beneficial bacteria. In order to support this bacteria you would want to carbon dose which aquaforest has supplements for. If you choose to carbon dose, in your case you would want to go for the diluted version of NP Pro and have this on a doser. You could probably get away with dosong yhe bacteria supplement less ofte as long as the carbon is dosed to support it. The problem with ULNS however is they often require daily supplements in order to support the corals in a ULNS environment. The key I've found with the aquaforest system is to watch your tank and and and adjust doses by visual signs.

One of the aquaforest products I have found most beneficial is their component 1+2+3 (I make my own though with component strong and dry mix as it'stands way cheaper). The added benefits of these trace elements have really helped in growth and color and I think many others can attest to this.

Either way you go in the end, reef salt or probiotic, is fine. Aquaforest is one of those systems you can go all in or pick and choose the products based on what you are looking to achieve.

Don't know if this really answered your question

What's your current measurements for phosphate and nitrate in your system?

[brisco]

My phosphate is showing zero on the Hanna and my nitrates are 0.05 Salifert.

The reason I am thinking of switching salts is, I don't like some of the high alk that I get form IO and I have been battling cyano and now dino's. So I was hoping that maybe probiotic would be the way to go (would this even help?). I dose c-balance as two part and my own Mag mix...which is what Aquaforest 1+2+3 is, I think..but I am not adverse to switching. My doser is only 3 heads so didn't really want to add something else.

I was all set to try biopellets, but after some research, they sounded a little tricky for me. Maybe I should find a way to add a fuge? Little tricky in my set up but there might be a way.

I recently added 2 gals of hydroton into the sump to increase the biofilter and started to use Nitroguard as well to reduce Nitrates.

I love to have a full tank of corals and fish...but right now Dinoflagellets are killing me!

[dcw1sfu]

Either salt is fine then as they both have close to natural sea water levels in terms of alkalinity. You are already low nutrient so not really necessary to change what you are doing otherwise, unless you are like me and always like to fiddle and change things. For carbon dosing methods, i've done zeo, vodka, vinegar, biopellets, all in one biopellets and now aquaforest which I am happiest with.

In terms of Dino's that's a whole different story and I've never had them so I cant really offer much advice. Although I do know people that have had success with a lights out period and hydrogen peroxide dosing (don't know if its the safest method). I'm not sure but the beneficial bacteria from the aquaforest probiotic salt might help to out compete the dino, but probably no where near enough to do so on its own. Again this is something you might want to research specifically.

But for lowering alk you could use either salt as both are roughly the same parameters.