Dino-X Review

[Bblinks]

So what's the word Vinny? I would like to know as well cause when the product first launched under a different name, it suppose to work on bryopsis too but since the new label, that has been taken off. So do you think it will work on bryopsis if the dosage is doubled and for a longer period of time? Just curious. Thanks for your time.

[Aquattro]

Originally Posted by Bblinks

So what's the word Vinny?

Vinny was here. Then Vinny wasn't....

[WarDog]

I'm guessing Vinny doesn't work Sunday's.

[Aquattro]

Originally Posted by WarDog

I'm guessing Vinny doesn't work Sunday's.

I suppose that's possible lol

[tparsons]

Dino X isn't designed to work on other algeas
It is specificially designed to target the dinoflagilate animal in a manner (when the directions are followed exactly) which will not cause harm to any other animals in the tank.

I know that there are some reports of it being used for green hair algea, briopsis, etc, however, that is not it's intended/designed use

Don't forget that you will get a false reading on phosphates when there is a significant amount of algea present as it is consuming it, so your reading is only what is "left over" and not being consumed by the algea.

Also, don't forget that Dino X was always intended as a "last resort" treatment. Have you tried increasing the number of water changes, running high quality phosban and carbon media. Do you use RO or tap water?

Sorry for the all the questions, just hoping we can solve this problem.

[Aquattro]

From the advertising - "Dino X works against dinoflagellates, bryopsis, and many other types of plague algae with no ill effects to corals."

Says to me it's is sold as meant to affect other algae

PO4 has always been low, NO3, always high. Yes RO, 50% water changes every 2 weeks. I think that's more than enough. Always run media for PO4 AND use fozdown, carbon full time, tried pellets, currently running zeo again. Nothing dents this algae, my rabbitfish won't even touch it. Some herbivore he turned out to be -lol

[Vinny@Fauna Marin]

Hi,

I'll try to answer the all questions in one post.

Dino X and what it treats
Our product is labeled as Dino X, but should not be considered as a solution for only Dinoflagellates. It is also a treatment for various types of algae such as hair algae, bubble algae, bryopsis, etc. As I mentioned in my first post, some algae requires more than one treatment period.

Dino X will treat most types of dinoflagellates. There are however, some types that release toxins when it begins of die off. With so many types out there, it is difficult to ID exact which one is toxic and non-toxic. For this reason, it is best to siphon out as much as possible before beginning treatment.

Product effectiveness
Some algae can be more stubborn than others and therefore the effectiveness of the product will depend on the current condition of the tank. This includes, water quality, feeding habits, current amount of algae present, quality of cleanup crew, condition of the live rock and sand, etc. Following our user guide is also very important.

For severe cases of algae outbreaks, we recommend users manually remove as much algae as possible before beginning treatment.

Risk of overdosing
It is not good to go above the recommended dose because then you risk harm to your livestock.


Aquattro,

When there is a good amount of algae present in the tank, much of the PO4 gets consumed by it. This causes false readings in test kits. It is possible that the algae is being continuously fueled by the PO4 and NO3 stored in the live rock and sand. Can you post a photo of what your rocks look like?