![]() |
|
#1
|
||||
|
||||
![]() My wife made a cloth curtain system to go around the top of my tank so it is easy to access the tank, but it blocks off the light spill so there's no glare in the eyes. Works well.
|
#2
|
|||||
|
|||||
![]() Quote:
I'm planning for a 30" wide tank, would you think of a fixture was centered on a wide tank the light spill will be less? Or is the viewing angle from sitting too low for it to make a difference? Quote:
![]()
__________________
- S H A O - |
#3
|
|||||
|
|||||
![]() Quote:
![]() Here's a pic of the view from the couch. ![]() |
#4
|
|||||
|
|||||
![]() Thanks for the pic. And nice tank!
Well, that's interesting. If the light spill is predominantly from the sides, that should be ok. How do you like the gyre?
__________________
- S H A O - |
#5
|
|||||
|
|||||
![]() Quote:
The Gyre was a first generation Gyre and it had a cracked cord (very common with first gens) and it was very noisy - could hear it ramping up and down, very electronic sounding. I could not deal with the noise. The motor block and mount were replaced with the latest versions, and now it's dead silent. The mount made all the difference in the world. Now I like it. ![]() Last edited by Myka; 01-24-2016 at 09:12 PM. |
#6
|
|||||
|
|||||
![]() I was just considering when I get my retro check of making my Leds into a canopy and adding some supplemental T5s
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#7
|
||||
|
||||
![]() My Current USA pro lights (x3 strips) sit right on the lip of the tank and are a couple of inches off the water. Very little spill over and even light through out the tank.
Intensity cut back to 50 percent whites and 55 percent blue. Tried to attach some pictures but 'failed because I am missing some sort of token'. Perhaps an admin can help... |