Hanging Ati sunpower

[Myka]

Originally Posted by chefpaakk

So with my ATI sunpower arriving soon, and am torn on how to mount it.
I currently rent, so putting holes in the ceiling is out of the question.

Do it anyway. Then when you move just put a bit of white filler (DAP Alex Plus is good) and no one will be the wiser. Most renters do more damage than a couple of screws in the ceiling.

[chefpaakk]

Id also be worried about trying to hang it on the ceiling and getting the damn thing to be straight!!

I am waiting for quotes on custom items but they seem to be taking their sweet ass time!!

[Myka]

Originally Posted by chefpaakk

Id also be worried about trying to hang it on the ceiling and getting the damn thing to be straight!!

Use a plumb bob.

[TheZoalander]

Bracket from Lee Valley

http://www.leevalley.com/en/Hardware...t=3,50659&ap=1

[GoFish]

Originally Posted by TheZoalander

Bracket from Lee Valley
http://www.leevalley.com/en/Hardware...t=3,50659&ap=1

Not sure how many bulbs are in the fixture? But looks like the design of that would get in the way. Unless you flip the bracket 90 degrees counter clockwise from the photo? I think its a bit easier touching up holes in the ceiling than the wall, looks wise anyway. Not sure how you'd mount an ATI/bracket to wall without doing some sort of damage to the wall

Originally Posted by Myka

Use a plumb bob.

Good call. I use these at work but ended up using fishing line tied to a nail

Whats your stand made of? Can it be moved to screw brackets into it from behind?
Reefsupplies carries the AI EXT rails (as Duncan mentioned), I'd ask how much weight they're rated for

[spit.fire]

LMK what you're looking for quotes on, i can get you one, generally take about a day to get the quote

Originally Posted by Myka

Use a plumb bob.

plumb bobs are a thing of the past, lasers are where its at

[WarDog]

Originally Posted by spit.fire

LMK what you're looking for quotes on, i can get you one, generally take about a day to get the quote

Quote for what Tyler? I read the thread and am kinda confused. 'Custom items'... more confused.

[chefpaakk]

I also think it might pose difficult to mount to an stand on an already filled tank.. Unless I drilled from the inside of the stand I guess.. But my sump is so large it's difficult to maneuver under there.

Tyler, the place that is quoting me says they would have one for me end of day tomorrow. I'll shoot you a diagram see what you think in the early am.

[Ryanerickson]

Originally Posted by chefpaakk

I am waiting for quotes on custom items but they seem to be taking their sweet ass time!!

Warren

[WarDog]

Originally Posted by Ryanerickson

Warren

Ah yes Ryan, thanks! So Tyler IS trying to solicit business right under my nose. Tisk tisk. Bad Tyler!