apex issue

[e46er]

Originally Posted by Nuggs

All the Apex controls at that point is the triac or mechanical relay to supply power.

If you hear it click then its working... So stupid question is the EB8 plugged into the wall?

How is your Apex powered via 12V adapter or through the EB8?



If the unit has power, do a simple test, turn all the outlets to on and use a small simply electrical device to test each outlet (desktop lamp). Aka rule out device or programming issues.

Sent from my Nexus 5 using Tapatalk

I have a decent knowledge of electricity. my gas qualification is heavy electrical.

powerbar is plugged into the wall no 12V adapter to the apex.
i used small pump that works in the wall outlet and not a single of the 8 on the EB8 despite what the head unit and apex fusion say about what the outlet is doing

[e46er]

on the getting started instructions it says 3 types of outlets they are
Variable- Variably controlled 0-10V outputs to control Apex Ready devices
Alert- Your audible sound and email alarm outlets
Outlet- Physical on/off outlets on your EB8

mine are listed as varible, alert, virtual

would that have anything to do with it and how do i change that?