|
|
|
|
|
#1
06-28-2015, 07:20 PM
|
||||
|
||||
Maybe Corix or Home Hardware? And I agree that you should replace a siliconed bulkhead, should not need silicone to seal.
|
|
#2
06-28-2015, 07:23 PM
|
|||||
|
|||||
|
If people want the white sch40 pvc slip/barb fittings like the one pictured I can get them from 1/2" all the way to 2".
__________________
www.oceanfreshaquarium.com/foz-down.html - Foz Down - an easy way to eliminate algae outbreaks caused by Phosphate and bring back the fun of reef keeping.
|
|
#3
06-28-2015, 07:30 PM
|
|||||
|
|||||
|
You can try western pump on 42nd right off 114th. They have lots of oddball fittings.
But I would honestly take the old stuff out and change it all.
__________________
 They call it addiction for a reason...
|
|
#4
06-28-2015, 08:16 PM
|
|||||
|
|||||
|
sorry the bulkhead itself is not leaking , the fitting was leaking where I screwed it into the the bottom of the bulkhead . I removed the adapter put the old hose barb back in and it did not leak. So Im not sure if the 2 fittings are different thread pitch but the hose barb fitting did not leak and the fitting in the first pic leaked .
I tried removing the bulkhead but I could not get it out hence why I was going to leave it. So I just need the best way to connect a ball valve mixed with soft hose . Would have preferred to re-do the whole line and bulkhead , just had a really annoying time trying to pull the bulkhead out .
__________________
stuff happens when you go outside Im a hustler / I'll hop in the ocean / sell a whale a splash
|
Hybrid Mode
