Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Buy/Sell/Trade > Buy/Sell/Trade (Aquatics hardware related only)

Reply
 
Thread Tools Display Modes
  #1  
Old 04-21-2015, 03:12 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Updated list:

Korallin Sulphur Denitrator with Eheim pump. Lightly used. $100

Brand new 6W UV sterilizer - need pump to run it. Good for nano tank. $25

Quiet One return pumps - 3000 and 4000 I think $50 each

Coralife SL-65 luft air pump. 65 liters per minute. Used for 2 years. $50
Coralife SL-65 luft air pump. 65 liters per minute. Used for 2 months. $80

(10) used sand air stones, excellent quality. Freshly bleached and ready to go. $2 each

Small tank (14x10x14") trimless was made for an ATO tank. $10

(3) 25-gallon high tanks (24x12x21") drilled in bottom for 1" bulkhead $25 each
(1) same as above, not drilled $25

40-gallon tank (36x18x16") drilled in both bottom back corners, but holes have been sealed - holds water just fine, is full right now. Could be re-opened. Would be good sump or quarantine tank. $40

(2) 55 gallon drums blue plastic - held RO/DI water $20 each

Vertex IN-250 protein skimmer. Dead pump (impeller is good). Rated for 150-250 gallons. $40

Vertex IN-250 protein skimmer. Runs well. Rated for 150-250 gallons. $200

Vertex IN-180 protein skimmer. Runs well. Rated for 100-180 gallons. $150

EuroReef SP5 impeller. Never used $20

Simple glass sump custom made (30x16x14" IIRC). Skimmer chamber, baffles, and return chamber. Trimless. $60

(2) Glass sumps made from 40-gallon breeder tanks (36x18x16") $60

2x4 Stand painted white. (96x24x38") $40

(2) 20-gallon Laguna round tubs. $10 each
(2) 16-gallon Laguna round tubs. $10 each
(2) 9-gallon Laguna round tubs $5 each

Random glued runs of 1" PVC plumbing. $5-20

2" PVC fittings. Unglued tees, 90 degree elbows, and 45 degree elbows. $3 each.

Cut offs of 2" PVC pipe. $1/ft
__________________
~ Mindy

SPS fanatic.


Last edited by Myka; 04-21-2015 at 03:14 PM.
Reply With Quote
  #2  
Old 04-21-2015, 03:16 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

See above - added a couple Vertex skimmers.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #3  
Old 04-22-2015, 02:44 AM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

sent PM re: sp5 impeller
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #4  
Old 04-22-2015, 04:36 AM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

In case you were wondering
SP5 impeller:
for use with a gen-x6000 pump
Reply With Quote
  #5  
Old 04-22-2015, 01:37 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Crap, yeah I just dug the impeller box out for Christy, it's the SPE5 impeller for the Eheim 1262 pump. My memory missed a letter.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:01 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.