Vertex rodi issue.

[reefwars]

Originally Posted by Proteus

Changed filters last week turned on to make water and have low booster pressure and low water production.. So I then put in new membrane. Made sure multiple times that there was no trapped air. Still low pressure and minimal water produced

Any ideas?

Sounds like the booster is fried , does it turn on can you feel it vibrate when it kicks in?

[Proteus]

Booster kicks in.. Goes up to 60psi

[ronau]

Sounds like pump is done, both of mine run at ~125 psi.

[reefwars]

Agreed 60psi is what you should get without the booster

[Proteus]

Looks like I'll be ordering a pump

[reefwars]

Originally Posted by Proteus

Looks like I'll be ordering a pump

If you bought it new you may be able to get warranty?

[Proteus]

I'll call proline and see

[hillegom]

Before you order new, check your connections.
Is the booster pump getting power?
Is the pressure sender sending the proper signal? If not, the pump will think that the psi is already high.
As mentioned take the pump off line and see if it will run, if it is getting power?
12V pump? maybe the transformer if pump does not start.
A lot of things to check before you have to spend big bucks