Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 03-24-2015, 07:51 PM
KPG007's Avatar
KPG007 KPG007 is offline
Member
 
Join Date: Mar 2008
Location: Surrey, BC
Posts: 225
KPG007 is on a distinguished road
Default

Quote:
Originally Posted by crimper View Post
Sorry to hear that Kelly.

That's why up to now, I'm still having a second thought installing my doser. I purchased it last December, calibrated and ready to go but opted to do the dosing manually. I will probably used it only when I'm going away.

O well my tank is not big as yours and I don't have much corals as you have. I think automating the process would take away my personal touch to my humble reef.

I hope your corals recover soon. Best of luck.
This is my second tank with a doser and the first one has worked flawlessly for years. This one was working fine too if not for the broken connector. It was a used doser and I would have found the issue out if I had kept up with the testing. Even if I had found it down around 3, I could have slowly raised it up over time and everything would have been fine.

Quote:
Originally Posted by ashr View Post
So sorry for the loss Kelly.. Tank crashes are the worst! I hope you can recover most of your stuff that you didnt loose off the bat. Good luck man, keep your head up!
Thanks Andrew.

Quote:
Originally Posted by Reef Pilot View Post
You have my sympathies, Kelly, for sure. I had a similar problem last summer with my alk doser plugging at the sump end. Because I was away a lot then, didn't have time to closely monitor everything, and by the time I discovered the problem the damage was done. Doesn't sound as bad as yours though, as my alk just went below 6 (normally at 8 or 9). But I still lost some prized SPS.

Surprisingly, some corals (incl some SPS) were not affected at all. However, it took about 3 months to recover from that before my SPS was happy again, with good color and growth returning. And I should have known better, too, as I have to regularly watch that alk return line so it doesn't plug.
Thanks Walter. That was the biggest surprise for me. As the Alk was going down, corals continued to look great, it was only after the Alk spikes in the water change did anything happen. I can handle brown coral knowing things are good now and they will return to normal soon enough.
Reply With Quote
  #2  
Old 03-24-2015, 08:11 PM
Reef Pilot's Avatar
Reef Pilot Reef Pilot is offline
Member
 
Join Date: Nov 2010
Location: Langley BC
Posts: 1,883
Reef Pilot is on a distinguished road
Default

Quote:
Originally Posted by KPG007 View Post
Thanks Walter. That was the biggest surprise for me. As the Alk was going down, corals continued to look great, it was only after the Alk spikes in the water change did anything happen. I can handle brown coral knowing things are good now and they will return to normal soon enough.
Actually mine got worse too after I corrected the alk, and then took 3 months to fully recover. Having said that I also had some other tank issues (high nitrates after I had disconnected my bio pellet reactor) just before this, and the low alk was the just final tipping point. But again, some SPS were never affected, and none of my LPS or soft corals even noticed anything amiss.

I think you are right, though, alk spikes make it worse. That's what did mine in, too, I think, when I raised it too quickly (didn't have time to fool around as I was not home a lot at that time).
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101
Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022
Solutions are easy. The real difficulty lies in discovering the problem.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:43 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.