![]() |
|
#1
|
|||||
|
|||||
![]() Looks like it will be a blast Steve! Needed the sump room for beer keg storage? Wendy and I have been toying around with a mantella tank for sometime now. I have them before and have always wanted a properly built tank for them. Not quite a paludarium, but close
![]() |
#2
|
|||||
|
|||||
![]() Quote:
|
#3
|
|||||
|
|||||
![]() Going back to complete step 3, plumbing.
Here you can see the return line which feeds the main return and two branch lines. The smaller branch line feeds the drip system, the larger branch line feeds the water fall. ![]() For now I've just connected the canister filter, it's a Fluval FX6. Later on I will be adding a UV sterilizer, an inline heater and probe holders for control of various operations. ![]() Here's a shot of the drip lines I ran. There's one main drip line that runs the top perimeter of the tank and essentially cascades down the rock keeping most pots wet. I also tee'd off that line and ran some dedicated lines to feed the larger pots. Valves will be added to these lines later to limit the flow a little more as it's pretty heavy right now, but for the time being the extra flow will help cure things up nicely. I also filled the pots with Hydrocorn for growing medium. ![]() ![]() ![]() ![]() ![]() And that pretty much sums up step 3, plumbing is essentially done except the few extra options that will be added later down the road. |
#4
|
|||||
|
|||||
![]() To clean things up I added some moss. I also filled the tank and started curing the concrete. No idea how long that will take but once the water clears up I'll start measuring pH. Here's the latest FSS.
![]() |
#5
|
|||||
|
|||||
![]() That is so kool
![]() What critters are you planning on adding ? |
#6
|
||||
|
||||
![]() You have done an awesome job so far. I am looking forward to seeing it once it's all completed!!
|
#7
|
||||
|
||||
![]() Nice work Steve, It's very impressive! can't wait till you put some livestock in there.
|